Questions And Answers - Gigaset A510 Manual

Hide thumbs Also See for A510:
Table of Contents

Advertisement

Kuwait
Customer Service Hotline Kuwait
Tel: 00965-22458737 / 00965-22458738
Al-Baptain Service Center
Shop #: 247
Qibla, Block 11,
Avenue 11,
Souk al Kabeer,
Fahad Al Salem Street,
Tel: 00965-2464993
Jordan
SEDR Home & office Electronics
Co - Tronicom
Wasfi Al-Tal St.,
Building No. 80,
2nd floor,
Tel: 00962-6-5625460/1/2
Lebanon
306, Jdeideh Sin el Fil Blvd,
Tel: 00961-1240259 / 00961-1236110

Questions and answers

If you have any queries about the use of
your telephone, visit our website at
www.gigaset.com/service
for assistance 24/7.
The table below also lists steps for trouble-
shooting.
The display is blank.
1. The handset is not activated.
¥ Press and hold the end call key a.
2. The battery is empty.
¥ Charge the battery or replace it
(¢ page 13).
Manufacturer warranty (Middle East)
"Base"
flashes on the display.
1. The handset is outside the range of the base.
¥ Move the handset closer to the base.
2. The base's range is reduced because
Eco Mode is activated.
¥ Deactivate Eco Mode (¢ page 41) or
reduce the distance between the handset
and the base.
3. The base is not activated.
¥ Check the base power adapter
(¢ page 11).
"
Place handset into base
flashes on the display.
Handset has not been registered with the base or
has been de-registered.
¥ Register the handset (¢ page 42).
The handset does not ring.
1. The ringtone is switched off.
¥ Activate the ringtone (¢ page 46).
2. The phone only rings if the phone number has
been transferred.
¥ Activate the ringtone for unknown calls
(¢ page 46).
You cannot hear a ringtone/dialling tone from
the fixed line.
The phone cord supplied has not been used or
has been replaced by a new cord with the wrong
pin connections.
¥ Please always use the phone cord supplied or
ensure that the pin connections are correct
when purchasing from a retailer (¢ page 58).
Each incoming call resets the date/time incor-
rectly.
The date and time are sent via e.g., your network
provider, a router or PABXs during calling line dis-
play. This data may be incorrect.
¥ Set the date/time correctly e.g., on the router
or PABX.
¥ Do not automatically copy the date/time
¢ page 17.
The connection always terminates after approx.
30 seconds.
Repeater activated/deactivated (¢ page 47).
¥ Activate/deactivate the handset (¢ page 22).
Error tone sounds after system PIN prompt.
You have entered the wrong system PIN.
¥ Reset the system PIN to 0000 (¢ page 48).
Forgotten system PIN.
¥ Reset the system PIN to 0000 (¢ page 48).
"
"
"
or
Register Handset
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A510a

Table of Contents