Authorisation; Environment - Gigaset A510 Manual

Environment

The other party cannot hear you.
You pressed the mute key v during a call. The
handset is "muted".
¥ Unmute the microphone (¢ page 29).
The number of the caller is not displayed
although CLIP has been set.
Calling Line Identification is not enabled.
¥ The caller should ask the network provider to
enable Calling Line Identification (CLI).
Refer to the notes on calling line display
¢ page 28.
You hear an error tone when keying an input.
Action has failed/invalid input.
¥ Repeat the process.
Watch the display and refer to the user man-
ual if necessary.
You cannot listen to messages on the network
mailbox.
Your PABX is set to pulse dialling.
¥ Set your PABX to tone dialling.
Gigaset A510A only:
No time is specified for a message in the
calls list.
Date and time have not been set.
¥ Set the date/time (¢ page 16).
During remote operation the answering
machine does not respond to key 9.
The system PIN is still set to 0000.
¥ Set the system PIN to something other than
0000 (¢ page 48).
The answering machine reports "Incorrect PIN!"
during remote operation.
You have entered the wrong system PIN. The con-
nection is terminated.
¥ Call answering machine again.
The answering machine is not recording any
messages/cancels the recording of a personal
announcement.
Its memory is full.
¥ Delete old messages.
¥ Play back new messages and delete.
Exclusion of liability
Some displays may contain pixels (pic-
ture elements), which remain activated or
deactivated.
This is completely normal and does not
indicate a fault.
56

Authorisation

This device is intended for analogue phone
lines outside the European Economic Area
(with the exception of Switzerland) depend-
ing on national type approval.
Country-specific requirements have been
taken into consideration.
We, Gigaset Communications GmbH,
declare that this device meets the essential
requirements and other relevant regulations
laid down in Directive 1999/5/EC.
A copy of the Declaration of Conformity is
available at this Internet address:
www.gigaset.com/docs
Environment
Our environmental mission
statement
We, Gigaset Communications GmbH, bear
social responsibility and are actively com-
mitted to a better world. Our ideas, technol-
ogies and actions serve people, society and
the environment. The aim of our global
activity is to secure sustainable life resources
for humanity. We are committed to a respon-
sibility for our products that comprises their
entire life cycle. The environmental impact
of products, including their manufacture,
procurement, distribution, utilisation, serv-
ice and disposal, are already evaluated dur-
ing product and process design.
Further information on environmentally
friendly products and processes is available
on the Internet at www.gigaset.com.