Advertisement
Front Panel
1. Power ON/OFF switch
2. LCD display
3. CD Slot
4. Mode button
5. AF Function (Alternative frequencies)
6. BAND button
Operation
POWER ON/OFF
•
By pressing this key, the unit is switched on and off. This unit is turned on by pressing any key.
SELECT and VOLUME KNOB
•
Rotate Volume up/down knob to control the VOLUME to select other functions, press the
button shortly until the desired functions is shown on the display. Picture below shows how control
functions are selected using the SELECT button
TA SEEK/TA ALARM
•
When press the SELECT button for more than 2 seconds, it is activated as selecting mode of these
function: TA SEEK Mode or TA ALARM mode. These functions are selected by rotating the volume
knob.
TA SEEK mode:
When newly turned station does not receive TA information for 5sec, the radio retunes to next
station which has not the same station (PI) as the last station, but has the TA information. In
TA seek mode, the current station can be changed to the completely different station because
the unit searches TA station when the field strength of the current station is very weak, or thec
urrent station has no TA signal.
TA ALARM mode:
Any automatic retune mode is not activated, just can be heard Beep sound.
7. Auto seek button
8-9. Auto or manual tuning (for radio mode)
next and previous track (for CD mode)
10. Preset stations (for radio mode)
CD control (for CD mode)
11. Functions selection/volume control
12. EJECT button
Advertisement
