92
In case of loss of your IS06, you can configure your IS06 so that the screen will
■
lock and become unusable after receiving a specified number of calls from a
registered phone number. We recommend that you set a lock pattern, password,
or PIN number beforehand from
[Location & security]▶[Set up screen lock] screen.
If
[Location & security]▶[Set up screen lock] is set to [None], the PIN "1234"
■
will be used to lock your screen when you use the Remote control lock function.
Activating the Remote Control Lock From a Registered Phone
Call your IS06 from a phone registered in your [Valid Caller
ID] list as many times as you set for [Incoming call count]
within the [specified period]
Be sure not to block your phone number when calling.
■
The Remote control lock cannot be activated if your IS06 is turned off, is outside
■
the service area, or if airplane mode is turned on. The Remote control lock may
also fail if your IS06 is in an area with poor signal quality.
Unlocking the Remote Control Lock
Unlock the screen lock. If
■
security]▶[Set up screen lock] is set to [None], you can enter "1234" and tap
[OK] after sliding to unlock in order to unlock the Remote control lock.
You must also unlock the screen lock from your IS06 when you retrieve it even if
■
you applied the Remote control lock using the Security Lock Service.
[menu]▶
[Settings]▶ [System]▶
[menu]▶
[Settings]▶ [System]▶
[Location &