I.D. AL EventPlayer Quick Start Manual

I.D.AL - EventPlayer
1 - Connections
1 2 3 4 5
1 - USB port - For SD card update only
2 - USB connection indicator
3 - Infrared sensor
4 - Slot for SD memory card
5 - USB HOST port - Connection for USB device, stick or hard disk
6 - USB HOST connection indicator
7 - Configurable button No.1
8 - Configurable button No.2
9 - LCD display
10 - Set-up button
11 - On/Off button
12 - Power indicator
2 - SD and USB stick memory
quality memory card of minimum size 256Mo
Choose a
3 - Operation of the EventPlayer
The EventPlayer plays MP3 and WAV audio files and SC2 sequence files created with the V2 Show Control software). Operation of the player and
the way files are broadcast are fully defined by the names allocated to directories and files.
Directory 000 to 999 :
Only ONE directory level is allowed at the root. The first three digits represent the directory No. and thereby its main name. To modify the default
settings of the player, just add optional parameters to the directory name.
Directory : 001 [option 1] [option 2] directory name
001 = Directory Number
List of options:
[Jxxx] - Jump to directory xxx after reading the current directory. To loop in the directory, xxx = name of the current directory.
[AUX] - Select the auxiliary input after reading the current directory..
[RET] - Return to the previously read directory after reading the current directory. Stay in current directory afer reading is the default setting.
[SEQ] - Specifies sequential playback mode for the current directory. By default, without parameter, random mode is selected.
[Rxxx] - Enable / Disable one or several output contacts.
[V+xx] or [V-xx] - Set the volume level of the directory - Relative value, increase or decrease xx from the general volume.
[NT] or [DT] - Define the interruption mode of the current directory. [NT] : directory will NOT be interrupted . [DT] : Interruption instruction is stored
and will be executed at the end of the directory. No option, the file in the directory can be interrupted.
Files
(63 characters max) 000 to 999 :
The file names are made up of 3 digits and a name of your choice. If the files are read in RND mode, then the File Number is not necessary. The
playback mode can be modifed using optional instructions inserted in the file name, such as file volume level or triggering of outputs.
File : 001 [option 1] [option 2] nom du fichier.mp3/wav/sc2
001 = File Number
List of options:
[Jxxx] - Jump to directory xxx after reading the current file.
[V+xx] ou [V-xx] - Change volume level of the file. Relative value, increase or decrease xx from the general volume.
[Rxxx] - Enable / Disable one or several output contacts.
[NT] or [DT] - Define the interruption mode of the current file . [NT] : file will NOT be interrupted . [DT] : Interruption instruction is stored and will
be executed at the end of the file. No option, the file can be interrupted.
® Waves System - La Ville en Bois - 44830 BOUAYE - FRANCE - Tel : +33 (0) 2 40 78 22 44 - www.id-al.com - V1.0/2009
- Interactive
EventPlayer -
6 7 8 9 10
Optional behaviour parameters
Options to modify playback mode
MP3/WAV/DMX
Quick start guide
1 1 12 13 14 15
13/14 - Power supply - second socket to power another device
15 - RS232 serial link
16 - Ethernet link
17 - DMX output
18 - Dry contact Inputs
19 - Outputs on opto-coupler
20 - Co-axial S/PDIF digital audio output
21 - Line level output
22 - Line level auxiliary input
23 - Amplified output for speakers
- We recommand Sandisk SD card. SD/HC are not compatible !!!
Name of your choice
player - Quick
16 17 18 19
Name of your choice
File extension
Start guide
20 21 22 23