Aaeon RTC-1000AS User Manual page 31

R u g g e d T a b l e t C o m p u t e r
Replacing a Memory Card
Removing a Memory Card
Turn off the RTC and disconnect the AC adapter. Turn the
RTC upside down and lay it on a flat surface.
Carefully remove the two RAM compartment cover screws and
remove the RAM compartment cover.
Carefully remove the GPS module screws, unplug GPS harness
then remove GPS module. (GPS module is optional)
Gently pull tabbed latched in the direction of the arrows (1). The
card will pop up slightly.
Pull upwards on the card and then slide the card out (2).
Chapter 2 Getting Started
Warning: Memory modules can be easily
damaged by static electricity. Leave the
module inside its static-proof bag until it is
ready for installation.
2 - 12
R T C - 1 0 0 0 A S