How Do I Erase Pictures So I Can Take More; What Do The Red Leds Mean - Vivitar ECam User Manual

How do I Erase Pictures so I can take more?

Erasing old pictures is simple. There are three ways.
1) Every time you transfer images from ECam to your
computer, the images will be moved out of ECam to your
computer and now ECam is "empty" and ready to take 24
more images.
2) If ECam's memory is full, the red LED on the back (item 12)
will be a bright, steady. You can erase all 24 images if you
hold the shutter button (item 2) for more than three
seconds. You will hear many rapid beeps and the Red LED
will turn off. ECam memory is now empty.
3) You can open the battery door and remove the battery for
several seconds. This will erase all images in ECam's
memory even if memory was not full.

What do the red LEDs Mean?

If you see this -
The LED on the back of ECam
is a bright, steady RED
The LED on the front of ECam
is flashing
ECam is saying -
ECam's memory is full. All 24
images have been taken
ECam is going to take a picture in
self timer mode, after the tenth
flash
10