Connection To A Personal Computer - JVC LYT1439-001B Instructions Manual

NOTES:
If no image is displayed on the LCD monitor, set
"S/AV INPUT" to "OFF". (
Digital Dubbing is performed in the sound mode
recorded on the original tape, regardless of the
current "SOUND MODE" setting. (

Connection To A Personal Computer

[A] Using USB cable
To USB
USB cable
(provided)
To USB
connector
PC with DV connector
PC
pg. 36, 41)
pg. 37)
[B] Using DV cable
OR
To DV IN/OUT
Core filter
DV cable
(optional)
Core filter
To DV connector
When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
Connect the DV cable first to the PC, and then
to the camcorder.
Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
[A] Using USB cable
It is possible to do the following thing:
Transfer still images stored on a memory card
to a PC.
[B] Using DV cable
It is also possible to transfer still/moving images
on a tape to a PC with a DV connector by using
the software equipped with the PC or
commercially available software.
If you are using a Windows
®
Windows Messenger to conduct video
conferences over the Internet, using a
camcorder. For details, refer to the help for the
®
Windows Messenger.
NOTES:
Refer to "SOFTWARE INSTALLATION AND PC
CONNECTION GUIDE" for the bundled software
and drivers.
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 15)
Never connect the USB cable and the DV
cable simultaneously to the camcorder.
Connect only the cable you wish to use to the
camcorder.
When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector
(4 or 6 pins) on the PC.
If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not
enter the USB mode.
The date/time information cannot be captured into
the PC.
Refer to the instruction manuals of the PC and
Software.
The still images can also be transferred to a PC
with a DV connector-equipped capture board.
EDITING
53
EN
®
XP, you can use
CONTINUED ON NEXT PAGE