JVC LYT1037-001A Software Installation
JVC LYT1037-001A Software Installation

JVC LYT1037-001A Software Installation

Software installation and usb connection guide

Advertisement

Quick Links

SOFTWARE INSTALLATION AND
USB CONNECTION GUIDE
LYT1037-001A
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.
JVC SOFTWARE LICENSE AGREEMENT
IMPORTANT
Thank you for purchasing our product. In order to start using the software program enclosed, you are required
to accept the terms and conditions of the agreement as provided below.
This is a legal agreement between you (either an individual or an entity) and Victor Company of Japan,
Limited (JVC). By opening the sealed software packages and/or by using the Program, you are agreeing to be
bound by the terms of this Agreement. Should you not agree to the terms hereof, return the unopened
software packets and the accompanying items to the place where you obtained them.
1
GRANT OF LICENSE
This License Agreement (Agreement) permits you to use the software program (Program) enclosed in this
package and/or the accompanying written material (e. g. printed manuals). Although you are also granted
license to load the Program into temporary memory (i. e. RAM) or install the Program once into permanent
memory (e. g. hard disk, CD-R, or other storage device) of one (1) computer system, you are strictly
prohibited to install the Program on a network server for the sole purpose of internal distribution.
2
COPYRIGHT
Notwithstanding the provision of Article 1 hereof, any copyright in the Program is owned exclusively by
JVC and is protected by the Japanese copyright law, copyright laws of other countries, as applicable, and
relevant provisions under international treaties including the Berne Convention for the Protection of
Literary and Artistic Works, as amended, and the Universal Copyright Convention, as amended. Therefore,
you must treat the Program like any other copyrighted material except that you may either (a) make one (1)
copy of the Program solely for your personal backup or archival purposes, or (b) transfer the Program to a
single hard disk, provided that you keep the original solely for your personal backup or archival purposes.
3
RESTRICTION ON THE PROGRAM
You may not reverse engineer, decompile, disassemble, revise or modify the Program, except to the extent
that such restriction is expressly prohibited by applicable law. JVC and its distributors and dealers shall not
be liable for any claims or defects etc. arising out of or in connection with such prohibited activities as
indicated in this Agreement.
TO CUSTOMERS:
MAKE SURE TO READ THIS CAREFULLY BEFORE OPENING THE SEALED
SOFTWARE PACKETS
Software License Agreement
M2D7S WEBCAM
— 1 —
ENGLISH
Printed in Japan
0302 FOVfIDfVP

Advertisement

Table of Contents
loading

Summary of Contents for JVC LYT1037-001A

  • Page 1 This is a legal agreement between you (either an individual or an entity) and Victor Company of Japan, Limited (JVC). By opening the sealed software packages and/or by using the Program, you are agreeing to be bound by the terms of this Agreement.
  • Page 2 PIXELA, Inc. Upon termination of this contract, this program, its add-ons, and all duplicates thereof, shall be returned to PIXELA, Inc., or abandoned. Victor Company of Japan, Limited — 2 —...
  • Page 3: How To Handle A Cd-Rom

    Use of this software is authorized according to the terms of the software license. When contacting the nearest JVC office or agency in your country about this software (refer to the JVC Worldwide Service Network at http://www.jvc-victor.co.jp/english/worldmap/index-e.html), please fill out the following and have the appropriate information ready.
  • Page 4: Operating Environment

    Display : Must be capable of displaying 800 x 600 dots with 16-bit color ATTENTION: Windows XP Users: Please visit http://www.jvc-victor.co.jp/english/download/index-e.html for additional information. For ImageMixer In addition to the requirements above, the following requirements must be satisfied to use ImageMixer.
  • Page 5: Software Installation

    Software Installation (Windows Follow the procedure described below to install the software. Quit any other software you are using. (Check that there are no other application icons on the status bar.) Load the provided CD-ROM in the PC. After a moment, the [Setup] screen appears. If the [Setup] screen does not appear, double-click [My Computer] and then double-click the CD-ROM icon.
  • Page 6 Then, [Choose Destination Location] screen appears. Click [Next]. Next, [Select Program Folder] screen appears. Click [Next]. [Setup Status] screen appears. Wait for a moment until the installation is finished. When the installation is finished, [Digital Photo Navigator Setup] screen appears and asks you if you want to create the icon on the desktop.
  • Page 7 When the message asking whether it is OK to restart the PC appears, click [Yes]. The PC restarts, and after a moment the [Setup] screen from step 1 appears. Repeat steps 2 and 3 to install all of the desired software. Installing [PIXELA ImageMixer 1.0] When the error message below appears while installing ImageMixer, click [OK] to complete installation.
  • Page 8 Updating [Device Manager] (Windows If the camcorder is connected to the PC with the USB cable before installing [USB Mass Storage Class driver] or [USB Stream driver], the installation might not be performed properly. In this case, follow the procedure described below to update the [Device Manager] and install [USB Mass Storage Class driver] and [USB Stream driver] properly.
  • Page 9: Connections (Windows ® )

    Connections (Windows Connecting the USB cable Connect the USB cable to copy still image and video clip files in a memory card to the PC or to use ImageMixer in capturing video in real time. Camcorder To assure safety, make sure all units are turned off before making any connections. Use the USB cable to connect the camcorder to the PC.
  • Page 10 Viewing the Contents of a Memory Card (Windows Install [USB Mass Storage Class driver]. ( Connect the camcorder to the PC with a USB cable. ( Make sure that there is a memory card in the camcorder. Set the camcorder to the memory card playback mode. Refer to the camcorder’s instruction manual for details.
  • Page 11: Copying Files To The Pc

    Copying Files to the PC (Windows Still image and video clip files that are stored in a memory card can be copied to the PC and played back on the PC. Double-click the [My Computer] icon on the desktop. If the camcorder is connected to the PC correctly, the [Removable Disk] icon appears.
  • Page 12: Disconnecting The Usb Cable

    Disconnecting the USB Cable (Windows Before loading or unloading memory cards or turning off the PC, first disconnect the USB cable and turn off the camcorder. ® When using Windows 98/98SE Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD monitor of the camcorder.
  • Page 13: Connections (Macintosh)

    Click [OK]. ● ● ● ● Windows ® 2000 A message indicating that the device can be safely removed appears. Click [OK]. Disconnect the USB cable. Set the Power Switch on the camcorder to “OFF”. The camcorder turns off. Connections (Macintosh) Connect the USB cable to copy still image and video clip files in a memory card to the PC or to use ImageMixer in capturing video in real time.
  • Page 14: Software Installation (Macintosh)

    Software Installation (Macintosh) Follow the procedure described below to install the software. Quit any other software you are using. Load the provided CD-ROM into the PC. Double click the CD-ROM icon. Double-click the [ImageMixer] folder in the CD-ROM. Double-click the [Setup Menu] icon. The installer starts up.
  • Page 15 Double-click the memory card icon on the desktop. The folders in the memory card appear. The following folders are automatically created in the memory card. Different file types are stored in different folders. Still images Still images : Folders within the [DCIM] folder (extension “.jpg”) Video clips : Folders within the [DCVI] folder...
  • Page 16: Copying Files To The Pc (Macintosh)

    Copying Files to the PC (Macintosh) Still image and video clip files that are stored in a memory card can be copied to the PC and played back on the PC. Double-click the memory card icon on the desktop. The folders in the memory card appear. Double-click the destination folder.

Table of Contents