Initializing A Memory Card - JVC LYT1439-001B Instructions Manual

To Reset The Number Of Prints
1
Perform steps 1 – 3 in "To Print All Still
Images (One Print For Each)".
2
Press or to select "RESET", and press
SET. The DPOF screen appears.
3
Press or to select "EXECUTE", and press
SET. The normal playback screen appears.
To cancel selection, select "RETURN".
The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
ADDITIONAL FEATURES FOR D.S.C.

Initializing A Memory Card

You can initialize a memory card any time.
After initializing, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1
Set the VIDEO/MEMORY Switch to
"MEMORY".
2
Set the Power Switch to "PLAY" while
pressing down the Lock Button located on the
switch.
3
Press MENU. The Menu Screen appears.
4
Press or to select
"FORMAT", and press
SET. The FORMAT
screen appears.
5
Press or to select
"EXECUTE", and press
SET. The memory card is
initialized.
When initialization is finished, "NO IMAGES
STORED" or "NO E-MAIL CLIP STORED"
appears.
To cancel initialization, select "RETURN".
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialization.
Also, be sure to use the provided AC Adapter, as
the memory card may be corrupted if the battery
becomes exhausted during initialization. If the
memory card becomes corrupted, initialize it.
35
EN
F ORMAT
ERASE AL L
EX I ST I NG DATA?
EXECUTE
RETURN