Copying Instruments; Storing Sequences - Pearl Red Box RBM 20 Owner's Manual

COPYING INSTRUMENTS

This page allows you to copy an Instrument from one Kit to an Instrument in another Kit.
(You can also copy it to the same Kit, which effectively stores that Instrument in that Kit.)
Use the CURSOR UP / DOWN buttons to select the field you want to
edit, and use the DEC- / INC+ buttons or VALUE / TEMPO DIAL to
select a new entry in that field.
1. Press KIT SELECT to enter the main screen.
2. Press SAVE. A new page will ask you to select KIT SELECT (F1
or F2) or INSTRMENT (F3 or F4).
3. Press INSTRMENT (F3 or F4). A new page titled "Copy
Instrument" will appear.
4. Make sure the "Copy" field is selected then select the trigger
whose Instrument you want to copy.
5. Select the "From" field.
6. Select the Kit that contains the Instrument you want to copy.
7. Select the "To" field.
8. Select the trigger where you want to copy the
Instrument in the "Copy" field.
9. Select the "To" field then select the Kit where you want to copy the Instrument in the "Copy" field. You can
copy it to any Kit, though there are 100 empty User Kit slots (#100-199) to choose from. Copying an Instru-
ment over an existing one will overwrite it.
Note: By default, the "Copy" and "To" fields and "From" and "User" fields will initially contain the same set-
tings so you can quickly store changes to the Instruments in your current Kit.
10. Press SAVE (F3 or F4).
11. A window will appear asking you to confirm your choice. Press CANCEL (F2 or F3) to cancel storing the
Kit. Press YES (F1) to store it.

STORING SEQUENCES

1. Press SEQ/SONG to enter the main Sequence page.
2. Press SAVE. A new page titled "Store Sequence" will appear.
3. Use the CURSOR UP / DOWN buttons to highlight the "From"
field of the window.
4. Use the DEC- / INC+ buttons or VALUE / TEMPO DIAL to select
the Sequence you want to store.
5. Use the CURSOR UP / DOWN buttons to highlight the "To" field
of the window.
6. Use the DEC- / INC+ buttons or VALUE / TEMPO DIAL to select a
location to store the Sequence. You can store it in any
Sequence number, though there are 25 empty User Sequence
slots (#75-99) to choose from. Storing a Sequence over an
existing one will overwrite it.
Note: By default, the "To" field will initially contain the same Sequence
number as the "From" field so you can quickly store changes to the current Sequence.
7. Press SAVE (F3 or F4).
8. A window will appear asking you to confirm your choice. Press CANCEL (F2 or F3)
to cancel storing the Sequence. Press YES (F1) to store it.
23