Table of Contents
Advertisement
Names of parts and their functions (continued)
[ID/CODE] menu
Edit ID/CODE that can be displayed on the screen.
• Select from INDICATION 1, 3 menu to see if it can be
displayed.
• Message is up to 22 alphanumeric characters.
• Characters that can be used: A-Z, 0-9, ., :, -, /, and space.
[DATE&TIME] menu
To change date and time setting, and date display format.
[DATE] sub-menu
Use the [LEFT]/[RIGHT] button to select the part of
the date to be changed (the numbers will blink), and use
the [UP]/[DOWN] button to set the new value.
[TIME] sub-menu
Use the [LEFT]/[RIGHT] button to select the part of the
time to be changed (the numbers will blink), and use
the [UP]/[DOWN] button to set the new value.
[DATE FORM] sub-menu
Use the [LEFT]/[RIGHT] button to select one of the
following three formats:
year, month, day/day, month, year/month, day, year
The month of day, month, year/ month, day, year of
HD OUT and SXGA OUT will be displayed in English
short form.
[SYNC] menu
Switching between sending GENLOCK basic signal, or input
basic signal from other device.
16
Advertisement
Table of Contents
