26
EN
SNAPSHOT Button
Power Switch
Display
PHOTO
Align marks.
SNAPSHOT Dial
Power lamp
Lock Button
During snapshot
RECORDING
Pro Snapshot
Use your camcorder like a regular camera and take a
snapshot, or several of them in succession.
PRO SNAPSHOT MODE SELECTION
1
SELECT OPERATION MODE
Set the Power Switch to "
pressing down the Lock Button located on the switch,
and pull out the viewfinder fully or open the LCD
monitor fully.
•When the Power Switch is set to "
Analyzer 4 and Multi-Analyzer 9 are not available.
2
SELECT PRO SNAPSHOT MODE
Choose the appropriate mode from among the 6 Pro
Snapshot modes (
Dial.
PRO SNAPSHOT RECORDING
1
TAKE PRO SNAPSHOT
Press SNAPSHOT.
•When the " " flash ready indicator is displayed,
flash takes place.
If you press during Record-Standby . . .
.... "PHOTO" appears and a still image will be
recorded for approx. 5 seconds, then the
camcorder re-enters the Record-Standby mode.
If you press during Recording . . .
.... "PHOTO" appears and a still image will be
recorded for approx. 5 seconds, then the normal
recording resumes.
Advanced Features (cont.)
", "
" or "
pg. 27) by setting the Snapshot
" while
" , Multi-