Table of Contents
Advertisement
4. Disconnect gas line from gas valve.
5. Remove (2) screws that mount burner tray to unit,
and (2) screws that secure gas valve to jacket.
6. Disconnect wires that terminate at gas valve.
7. Disconnect hi-tension wire from igniter.
Orifice
Igniter
Orifice
8. Remove (1) screw that mounts ground wire to
9. Slide out burner tray.
10. Reverse above procedure to reinstall.
Rear Hold Down Bracket
Burner
Pilot
Shield
Fig. 29: Millivolt Burner Tray Assembly
Rear Hold Down Bracket
Burner
Fig. 30: DSI Burner Tray Assembly
23
burner tray.
Millivolt Pilot Assembly
(under Pilot Shield)
Millivolt Gas Valve
(Invensys shown)
Manifold
Pilot Lighter Tube
Orifice Placement Bracket
Pilot Bracket
Burner Tray Panel
DSI Gas Valve
(Honeywell shown)
Manifold
Orifice Placement Bracket
Burner Tray Panel
Hide quick links:
Advertisement
Table of Contents
