Advanced Features - JVC LYT0275-001A Instructions Manual

38
EN
MENU Button
Select Dial
Display
48kHz MODE FULL SOUND
32kHz MODE SOUND1
SYNCHRO 0 . 0
DISPLAY ON
TIMECODE OFF
4 END
Playback Menu
4 48kHz MODE FULL SOUND
32kHz MODE SOUND1
SYNCHRO 0 . 0
DISPLAY ON
TIMECODE OFF
END
Power Switch
FULL SOUND
SOUND1
FULL SOUND
SOUND2
SOUND1
SOUND2
ON
OFF
ON
OFF
PLAYBACK
Playback Menu
The Playback Menu allows you to set the following
functions:
Playback Sound (32 kHz, 48 kHz), Synchro Comp,
Display and Time Code. The following procedure applies
to all except Synchro Comp (
1
SELECT OPERATION MODE
Set the Power Switch to "PLAY".
2
ACCESS PLAYBACK MENU
Press MENU. The Playback Menu appears.
3
SELECT FUNCTION
Move the highlight bar to the desired function by
rotating the Select Dial. Press the Select Dial to
activate.
4
SET FUNCTION PARAMETERS
Rotate the Select Dial to cycle through the available
settings for the selected function, and stop when the
desired setting appears. Then press the Select Dial,
and the highlight bar automatically moves to "END".
•To set parameters for other functions, repeat steps 3
and 4.
5
CLOSE MENU
Press the Select Dial again, and the menu disappears.

Advanced Features

pg. 52, 53).