Honeywell HRHD4+ User Manual page 10

5. Alarm Out Setup
6. Audio Setup
7. RS232/RS485 Setup Screen
8. Record Mode Setup
9. Time Lapse Record Mode Setup
10. Time Lapse Recording Schedule Setup
11. Pre Event Recording Setup
12. Alarm In Event Action (Record) Setup
13. Alarm In Event Action (Alarm Out) Setup
14. Alarm In Event Action (Notify) Setup
15. Motion Detector Event Action (Record) Setup
16. Motion Detector Event Action (Alarm Out) Setup
17. Motion Detector Event Action (Notify) Setup
18. Video Loss Event Action (Record) Setup
19. Video Loss Event Action (Alarm Out) Setup
20. Video Loss Event Action (Notify) Setup
21. On Screen Display Setup
22. Sequence Display Setup
23. LAN Setup
24. Modem Setup
25. Callback Center (LAN) Setup
26. Callback Center (Modem) Setup
27. Configuration Setup
28. The Multi Channel Digital Video Recorder must utilize traditional VCR like
controls to provide the benefits of digital recording with minimal training.
The unit shall include intuitive front panel controls such as play/pause, fast
forward, rewind, record, menu, search, etc., and shall incorporate a jog
shuttle to allow video review using step by step or variable speed control.
29. The Multi Channel Digital Video Recorder shall include an RS232 port for
remote control/integration of the unit with third party systems. A setup
screen must be available to adjust the settings for baud rate, parity, data
bits, and stop bits. ASCII control codes must be readily available from the
manufacturer for control and programming of the Digital Video Recorder.
30. The Multi Channel Digital Video Recorder shall include an RS485 port
used for either remote control of the unit or PTZ dome camera control.
When the port is used for remote control, the unit shall allow control from
third party systems, such as VideoBloX matrix systems, access control
systems, or building management systems.
available to adjust the settings for baud rate, parity, data bits, and stop
bits. When the port is used for PTZ dome camera control, PTZ control
from the front panel controls or through the remote software (including up
to sixteen (16) presets with names) must be available. The unit shall
control the following PTZ camera's:
HRHD Plus series Digital Video Recorder
- 10 -
A setup screen must be
HRHD4+, 9+, 16+