Wds Bridge Mode - EnGenius EAP350 User Manual

55

8.3 WDS Bridge Mode

In WDS Bridge Mode, the EAP350 can wirelessly connect different LANs by configuring the MAC address and security
settings of each EAP350 device. Use this mode when two wired LANs located a small distance apart want to
communicate with each other. The best solution is to use the EAP350 to wirelessly connect two wired LANs, as shown
in the following figure.
WDS Bridge Mode can establish four WDS links, creating a star-like network.
Note: WDS Bridge Mode is unlike Access Point. Access Points linked by WDS are using the same frequency channel, more Access Points
connected together may lower throughput. Please be aware to avoid loop in your wireless connection, otherwise enable Spanning Tree
Function.