Table of Contents
Advertisement
10
EN
T30•45•60 tape length select button
SP-LP recording
mode button
Set POWER to "CAMERA".
Tape length indicator
T30
Recording mode indicator
SP
T30
T45
T60
LCD monitor or
viewfinder
SP
LP
GETTING STARTED
Tape Length Setting
Set the tape length according to the length of the tape
used.
SET TAPE LENGTH
1
Press T30•45•60 until the required indication
appears in the LCD monitor or the veiwfinder. T30 =
30 minutes of recording time, T45 = 45 minutes,
and T60 = 60 minutes (in SP).
NOTE:
The tape remaining time (
LCD monitor or the viewfinder is correct only if the
correct tape length has been selected.
Recording Mode Setting
Set depending on your preference.
SET RECORDING MODE
1
Press SP•LP button. "SP" (Standard Play) provides
higher picture and sound quality and is better for
dubbing, while "LP" (Long Play) is more economi-
cal, providing twice the recording time.
NOTE:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
(cont.)
pg. 15) displayed in the
Advertisement
Table of Contents
