Table of Contents
Advertisement
24
EN
PICTURE STABILIZER
LCD monitor or viewfinder
To brighten the image
–
06
+
02
Exposure Level Indicator
+
To darken the image
RECORDING
Picture Stabilizer
This feature compensates for unstable images caused by
camera-shake, particularly noticeable at high magnifica-
tion.
ACTIVATE PICTURE STABILIZER
1
Press PICTURE STABILIZER. "
LCD monitor or the viewfinder.
•To switch off the Picture Stabilizer, press PICTURE
STABILIZER. The indicator disappears.
NOTES:
Accurate stabilization may not be possible if hand
shake is excessive, or under the following conditions:
• When shooting subjects with vertical or horizontal
stripes
• When shooting dark or dim subjects
• When shooting subjects with excessive backlighting
• When shooting scenes with movement in various
directions
• When shooting scenes with low-contrast
backgrounds
Switch off Picture Stabilizer when recording with the
camcorder on a tripod.
Exposure Control
This feature automatically adjusts the iris for the best
available picture quality, but you can override and make
the adjustment manually.
SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.
BRIGHTEN IMAGE
2
Press + (maximum +06). The Exposure level
indicator appears in the LCD monitor or the
viewfinder.
OR . . .
DARKEN IMAGE
Press – (maximum –06). The Exposure level
indicator appears in the LCD monitor or the
viewfinder.
When you want to return to the factory setting . . .
RESTORE INITIAL SETTING
06
3
Press + and – simultaneously. The standard setting is
immediately restored and the Exposure level
indicator disappears.
Advanced Features (cont.)
" appears in the
Advertisement
Table of Contents
