Introduction to the "Functions and Operating Instructions" for stations for EXES-6000 This booklet, which explains the functions and operating "PV" Type and "NP" Type procedures of stations for TOA's EXES-6000 Intercom System using central processing unit CP-62 and exchanges Type Definition Description...
Page 4
(B) Selecting the dial operation method The EXES-6000 Intercom System is designed to operate with a minimum of dial operation. Selection of the simplest method is accomplished by means of switches inside the exchange according to the number of stations and type of functions employed in the system.
Part names and functions of the station keyboard Type 1 In-use Lamp Volume switch Adjusts the volume of the station Lights up when the station is on speaker. line with another station. Privacy switch General purpose control Pocket Pager Registration response Conference Paging call...
Page 6
Part names and functions of the station keyboard Type 2 , In-use Lamp Volume switch Adjusts the volume of the station Lights up when the station is on speaker. line with another station. Privacy switch General purpose control Pocket Pager Registration response Conference...
Page 7
Part names and functions of the station keyboard Type In-use Lamp Volume switch Lights up when the station is on Adjusts the volume of the station line with another station. speaker. Privacy switch General purpose control Pocket Pager Registration response Paging call Conference Mic off...
Functions: EXES-6000 CP-62 Selectable Function Optional Standard Classification Function Funtion Function By DIP By No. 200 Switch Programming Automatic Line Release Camp-On-Busy Mic-Off Single Digit Dialing Single Digit Automatic Access to Paging Master/Sub Relationship Privacy • Camp-On-Privacy/Continuous Calling Tone Continuous...
Functions: EXES-6000 CP-62 Notes. *4: Additional equipment is required for paging. 1. X X / Y Y indicates to select either XX or YY. 2. Not all circles of The Switch Selection table cor- *5: Each zone of paging provides Station paging and/or respond to the DIP switches of the CP unit.
Page 10
Paging Response 37) Destination Annunciation Indication Paging response may be made either by pressing (Interface for the Indicator Board is to be made by the "Zone No.", or [Simply pressing using Data Transmitter DT-E11 and Receiver DR-B61.) General Purpose Control Personal number registered stations are indicated.
Station numbering schedule 1. The number of station that can be connected to an exchange varies according to the type of exchange and the number of paging zone. 2. Either 2-digit number or 3-digit number for station numbering schedule is assigned to the system according to "type of dial operation"...
EXES-6000, CP-62 Selectable Four (4) Types of Dial Operations Type 1 Type 2 Type 3 Type 4 Function 3-digit dialing, Programming Station No. 3-digit dialing, standard 2-digit dialing, paging mainly 2-digit dialing (90 stations) Classification Number With 20 ~ 99 (80 stations)
EXES-6000, CP-62 Summary of Dial Operations (Type 1) 3-digit dialing, without the function of Programmable station numbering (No. 200 ~ 327 (100 ~ 227)) (CP-62 Standard) Classification Function Dial operation Description Number Press-to-talk Conversation is simplex when PTT bar is used.
Page 14
Function Description Classification Dial operation Number All-call plus 7 -zone paging X : 0 (All-call), 1 ~ 7 (Zone) Any station can be used to initiate PA or station paging. A person paged can respond from the nearest master station. All-call plus 15-zone paging X X : 00 (All-call), 01 ~ 15 (Zone) Combination paging...
EXES-6000, CP-62 Summary of Dial Operations (Type 2) 3-digit dialing, with programmable station number function (No. 200(100) ~ 999) (Dial operation is same as CP-63) Classification Function Dial operation Description Number Press-to-talk Conversation is simplex when PTT bar is used.
Page 16
Number Description Classification Function Dial operation All-call plus 7 -zone paging X : 0 (All-call), 1 ~ 7 (Zone) Any station can be used to initiate PA or station paging. A person paged can respond from the nearest master station. All-call plus 15-zone paging X X : 00 (All-call), 01 ~ 15 (Zone) Several zones may be paged simultaneously.
EXES-6000, CP-62 Summary of Dial Operations (Type 3) 2-digit dialing and easy paging operation 60 stations (No.20 ~ 79), 70 stations (No. 10 ~ 79)) Function Classification Dial operation Number Description Press-to-talk Conversation is simplex when PTT bar is used.
Page 18
Classification Function Dial operation Number Description All-call plus 7-zone paging X : 0 (All-call), 1 ~ 7 (Zone) Any station can be used to initiate PA or station paging. A person paged can respond from the nearest master station. All-call plus 15-zone paging X X : 00 (All-call), 01 ~ 15 (Zone) Combination paging Several zones may be paged simultaneously.
EXES-6000, CP-62 Summary of Dial Operations (Type 4) 2-digit dialing, ( 80 stations (No. 20 ~ 99), 90 stations (No. 10~99)) Function Classification Dial operation Descriptiom Number Press-to-talk Conversation is simplex when PTT bar is used. When a station is called by continuous calling...
Page 20
Classification Function Dial operation Number Description All-call plus 7 -zone paging X : 0 (All-call), 1 ~ 7 (Zone) Any station can be used to initiate PA or station paging. A person paged can respond from the nearest master station. All-call plus 15-zone paging X X : 00 (All-call), 01~15 (Zone) Combination paging...
Speech functions Either "PV" Type (the system with Privacy function) or "NP" Type (Without Privacy function) mode should be selected in the total intercom system. When Privacy Switch (SW) of station is turned ON, privacy tone is available in "PV"Type system, while continuous calling tone is available in "NP"...
Station operation 1. Handset Master Station Model TL-600M Handset Speaker volume switch Dial keys In-use lamp < Making a call > 1. Pick up the handset and touch dial the station 5. Hang up the handset or depress the key to termi- number of the party you wish to talk to after hearing nate the conversation.
3. Hands-free Master Station Model HF-620M/630M/631M/650M Speaker In-use lamp Speaker volume switch Privacy switch Dial keys Microphone HF-630M HF-620M HF-650M HF-631M < Making a call > < Responding to a call > 1. Touch dial the station number you wish to call, [In the case that the Privacy switch is in the OFF regardless of whether the Privacy switch of your position.]...
Page 25
3. Hands-free Master Station Model HF-620M/630M/631M/650M Speaker In-use lamp Speaker volume switch Privacy switch Dial keys Microphone HF-630M HF-620M HF-650M HF-631M < Making a call > < Responding to a call > 1. Touch dial the station number you wish to call, [In the case that the Privacy switch is in the OFF regardless of whether the Privacy switch of your position.]...
Model (HF-620S/630S/631S/640S) Hands-free Substation Speaker In-use lamp Speaker volume switch Privacy switch Dial keys Microphone HF-640S HF-630S HF-620S HF-631S < Making a call > < Responding to a call > 1. Touching the key makes a call to the designated [In the case that the Privacy switch is in the OFF other station whether the Privacy switch on your position.]...
Page 27
Hands-free Substation Model (HF-620S/630S/631S/640S) Speaker In-use lamp Speaker volume switch Privacy switch Dial keys Microphone HF-640S HF-630S HF-620S HF-631S < Making a call > < Responding to a call > 1. Touching the key makes a call to the designated [In the case that the Privacy switch is in the OFF other station whether the Privacy switch on your position.]...
Page 28
Hands-free / Handset Master Station Model HF-600M/610M/660M (With Auto-Dialer) Loud speaker Handset Speaker Speaker volume switch In-use lamp Privacy switch Dial keys Microphone HF-600M HF-610M HF-660M < Making a call > < Responding to a call > 1. Hands-free conversation may be made by simply [In the case that the Privacy switch is in the OFF touch dialing the station number you wish to call.
Hands-free / Handset Master Station Model HF-600M/610M/660M (With Auto-Dialer) Loud speaker Handset Speaker Speaker volume switch In-use lamp Privacy switch Dial keys Microphone HF-600M HF-660M HF-610M < Making a call > < Responding to a call > 1. Hands-free conversation may be made by simply [In the case that the Privacy switch is in the OFF touch dialing the station number you wish to call.
Page 30
Hands-free / Handset Substation Model HF-600S/610S Loud speaker Handset Speaker Speaker volume switch. In-use lamp Privacy switch Dial keys Microphone HF-610S HF-600S < Making a call > < Responding to a call > [In the case that the Privacy switch is in the OFF 1.
Page 31
NP Type Hands-free / Handset substation Model HF-600S/610S Loud speaker Handset Speaker Speaker volume switch. In-use lamp Privacy switch Dial keys Microphone HF-610S HF-600S < Making a call > < Responding to a call > [In the case that the Privacy switch is in the OFF 1.
Page 32
Hands-free / Handset Master Station with Auto-Dialer Model HF-660M Handset Loud speaker Registration mode switch Auto-Dialer keys Privacy/ln-use lamp Page selector switch Entry key Privacy switch Dial keys Hands-free microphone < Making a call > Note. 1. For programming the auto-dialer, please refer to the 1.
Automatic Line Release When, in dialing, all of the numbers are not dialed within 5 seconds, the station is automatically disconnected from the speech path and dialing cannot be completed. In this instance, the dialing process will have to be repeated from the beginning.
Camp-On Privacy When the party you are calling has his station on Privacy mode, by simply waiting you will automatically "Camp- On" the line. (Privacy tone sounds continuously.) As soon as the Privacy mode is released, or as soon as he one-touch dials any of the keys or as soon as he picks up a handset of his station, you will be automati-...
Page 35
Camp-On Privacy When the party you are calling has his station on Privacy mode, by simply waiting you will automatically "Camp- On" the line. (Privacy tone sounds continuously.) As soon as the Privacy mode is released, or as soon as he one-touch dials any of the keys or as soon as he picks up a handset of his station, you will be automati-...
Talk Back First, call the "Talk-Back" station as in a normal call. Calling "Talk-Back" Station ("Talk-Back" station) The Calling tone will sound and the message is transmitted. In this case, while the calling station has the Press-To-Talk bar depressed, the caller can transmit a one-way message. When this bar is released, the "Talk-Back"...
Single Digit Dialing Single digit registration Register in advance as follows: Single digits of station number Confirmation tone Station number (2 digits for 2-digit dial) Single digit of personal number Personal number Confirmation tone Single digit of paging call Paging zone Confirmation tone Single digit of All-call paging response Confirmation tone...
Page 38
Single Digit Dialing Single digit registration Register in advance as follows: Single digits of station number Confirmation tone Station number (2 digits for 2-digit dial) Confirmation tone Single digit of personal number Personal number Confirmation tone Single digit of paging call Paging zone Confirmation tone Single digit of All-call paging response...
Master Sub Relationship Master/Substation associations are set up by using station #200 as the programming station. Once these relationships have been established, substations can then contact their designated master stations by simply touch dialing If TL-600S Handset substation is used, substations can be Substation connected to their designated master stations by simply picking up a handset.
Refer to Fig. 2 Paging call Note. Single digit registration for Handset Substation as well as No.200 programming is required for this function at the time of installation. Refer to EXES-6000 CP-62 Paging response Installation Handbook for details. Response to a paging call Fig.
Personal Number Call A personal number may be registered at any master station which the person to whom the number is assigned expects to be. A party wishing to receive personal number calls at a specific station may register his number at that station by Registration touch dialing Personal Number.
Page 42
Personal Number Call A personal number may be registered at any master station which the person to whom the number is assigned expects to be. A party wishing to receive personal number calls at a specific station may register his number at that station by Registration touch dialing Personal Number.
There is no limit to the number of stations that may be equipped with this function, but a No.200 registration must be completed (refer to Installation Handbook for EXES-6000 CP-62.) bar while the conti- 2. When the caller depresses the...
Remote Response Type 1 Dial operation for Remote response This feature is available only among stations programmed for this purpose. When a station at which no one is present is called by means of a continuous calling tone, remote Calling tone response to that call can be made by pressing the from any other station programmed for this function.
Remote Response Dial operation for Remote response This feature is available only among stations programmed for this purpose. When a station at which no one is present is called by means of a continuous calling tone, remote Calling tone response to that call can be made by pressing the from any other station programmed for this function.
Call Transfer Call Transfer from Called Station Call During the conversation, first dial Called Station Calling Station (the Station Number of the person the call is to be trans- ferred to). Called Station The original call is then held and the holding tone is trans- mitted to the other party, while the third party is called and asked whether he will accept the call.
Page 47
Call Transfer Call Transfer from Called Station Call During the conversation, first dial Called Station Calling Station (the Station Number of the person the call is to be trans- ferred to). Called Station The original call is then held and the holding tone is trans- mitted to the other party, while the third party is called and asked whether he will accept the call.
Page 48
Paging During Normal Call A paging call can be made by a called party of an existing call to a third party, the third party's response accepted while the original call is on hold, and the original call Conversation resumed when the response call has ended. Press and the desired zone number.
Page 49
Paging During Normal Call A paging call can be made by a called party of an existing call to a third party, the third party's response accepted while the original call is on hold, and the original call Conversation resumed when the response call has ended. Press and the desired zone number.
Group Hunting When the party you are calling is on another line, your call is automatically rerouted to another station which is pro- grammed from the beginning. When the party to whom the call is rerouted is also on another line, the call can further be rerouted to the other Conversation station by programming.
Secretary Transfer This function is only available when a specified station is Executive programmed for this purpose with use of Station #200 in the programming mode. Automatic transfer of incoming PRIVACY calls by an executive to his secretary is accomplished by placing the Privacy Switch on his station in the ON position.
Page 52
Secretary Transfer and Call Transfer Adoption of the selective function "Transfer" allows rerout- PRIVACY ing of the call transferred to the secretary back to the Executive executive's station. When the secretary answering a call touch dials Secretary Other person Call Executive's station number Secretary dials (Executive)
Page 53
Secretary Transfer and Call Transfer Adoption of the selective function "Transfer" allows rerout- PRIVACY ing of the call transferred to the secretary back to the Executive executive's station. When the secretary answering a call touch dials Secretary Other person Call Executive's station number Secretary dials (Executive)
Page 54
Secretary Transfer and Call Transfer Adoption of the selective function "Transfer" allows rerout- PRIVACY ing of the call transferred to the secretary back to the Executive executive's station. When the secretary answering a call touch dials Secretary Other person Call Executive's station number Secretary dials (Executive)
Page 55
Secretary Transfer and Call Transfer Adoption of the selective function "Transfer" allows rerout- PRIVACY ing of the call transferred to the secretary back to the Executive executive's station. When the secretary answering a call touch dials Secretary Other person Call Executive's station number Secretary dials (Executive)
Call Forwarding Registration of Call Forwarding When you will be away from your station and wish all incoming calls to be rerouted to a different destination you are going to move to, you can do so by registering that station number before you leave. Registering Call Forwarding function To program this function, touch dial plus the...
Page 57
Call Forwarding Registration of Call Forwarding When you will be away from your station and wish all incoming calls to be rerouted to a different destination you are going to move to, you can do so by registering that station number before you leave. Registering Call Forwarding function To program this function, touch dial plus the...
Priority When the party called is on the line, as indicated by the busy tone, dialing transmits a priority tone to the called party. The same tone is audible at the calling station. The call is connected if the called party also responds by dialing Busy Tone Priority In this event, the original conversation partner of the party...
Conference A "Hands-Free" conference call can be made with up to 4 persons. For a conference under this function the other A "Hands-Free" conference call can be made participants may be called either through their station num- with up to 4 persons. ber, personal number or by Single Digit Dialing.
Page 60
Conference A "Hands-Free" conference call can be made with up to 4 persons. For a conference under this function the other A "Hands-Free" conference call can be made participants may be called either through their station num- with up to 4 persons. ber, personal number or by Single Digit Dialing.
Paging A variety of paging modes allows paging over a wide area 3. Responding to a paging call from any master station. The paged party may respond A. Automatic response from the nearest master station. 1. Zone paging response Touch dialing at the station within the paged zone permits a response to the party who placed a Paging modes include external PA systems and/or Station...
Other Paging Modes 1. Combination paging Note. Combination paging is used when several zones must be Dial operation of Combination paging paged simultaneously through External PA or Station Paging call paging. A special paging area can be created wherever the paging ranges overlap by combining several zones. A maximum of 10 combinations can be created in this way Combination zone No.
How to select the paging area and make the paging call. Paging functions may include both external PA and sta- tions, depending on the zone being used. The paging area is limited to individual zone, Combination paging and All-call paging depending on the call range. Paging Dialing operation Paging call...
Page 64
How to select the paging area and make the paging call. Paging functions may include both external PA and sta- tions, depending on the zone being used. The paging area is limited to individual zone, Combination paging and All-call paging depending on the call range. Paging Dialing operation Paging call...
Note 2: To respond to Zone paging by pressing No.200 registration of the stations (consecutive station numbers) within each zone must be made. Such registration is required for both external and station paging. For further details, please refer to Installation Hand Book for EXES-6000 CP-62. —64—...
Page 66
Note 2: To respond to Zone paging by pressing No.200 registration of the stations (consecutive station numbers) within each zone must be made. Such registration is required for both external and station paging. For further details, please refer to Installation Hand Book for EXES-6000 CP-62. —65—...
Combination Paging Combination of individual zones Example 1 Several zones can be called simultaneously using external Combination zone 92 Combination zone 91 PA paging and station paging. This is combination paging and is initiated by pressing Zone 4 Zone 1 Zone 3 Paging will be broadcast to predetermined zones.lt is possible to wait for...
Page 68
To operate combination paging, No. 200 registration indi- cating the individual zones to be included in the combina- tion zone must be made. For further details, refer to Installation Hand Book for EXES-6000 CP-62. Programming for Example 1. Combination Individual zone...
Page 69
Combination Paging Combination of individual zones Example 1 Several zones can be called simultaneously using external Combination zone 92 Combination zone 91 PA paging and station paging. This is combination paging and is initiated by pressing Zone 4 Zone 1 Zone 3 Paging will be broadcast to predetermined zones.
Page 70
Example 4 Combination zone 94 Combination zone 94 Zone 3 Zone 4 Zone 4 Zone 3 Zone 2 Zone 3 Zone 4 Zone 2 Zone 2 Response Call Response Call Response Response Call No.235 No236 No234 No.235 To operate combination paging. No. 200 registration indi- cating the individual zones to be included in the combina- tion zone must be made.
Emergency All-Call Paging Handset substation TL-600S should normally be used for Emergency all-call paging is made the emergency all-call station, No. 247. To broadcast emergency all-call paging, pick up a handset. AlI-call The highest priority all-call paging can be broadcasted to all zones without pre-announcement of paging.
First station number Last station number quired when station paging priority is unnecessary. For further details, see Installation Hand Book for EXES-6000 CP-62. Note 5: Use of both station paging priority and external paging: Station paging priority interrupts calls in stations of zones 1 through 7 for both station and external paging.
Page 73
First station number Last station number quired when station paging priority is unnecessary. For further details, see Installation Hand Book for EXES-6000 CP-62. Note 5: Use of both station paging priority and external paging: Station paging priority interrupts calls in stations of zones 1 through 7 for both station and external paging.
Personal Number Paging Type 1 If you wish to receive personal number paging calls, you Registering a Personal Number may register your personal number at any station assigned in your desired paging zone by dialing Any station in a Paging zone No. 3 confirmation tone is heard.
Page 75
Personal Number Paging If you wish to receive personal number paging calls, you Registering a Personal Number may register your personal number at any station assigned in your desired paging zone by dialing Any station in a Paging zone No. 3 confirmation tone is heard.
Page 76
Personal Number Paging If you wish to receive personal number paging calls, you Registering a Personal Number may register your personal number at any station assigned in your desired paging zone by dialing Any station in a Paging zone No. 3 confirmation tone is heard.
Station station paging zone. paging zone This function is programmed at station No. 200. Please see Installation Instructions for EXES-6000 CP-62. Hardwired Programmable station number station number Dialing...
Group Blocking Example Function (A) . . The system can be grouped or divided into a maximum of 8 groups of stations with sequential station numbers. Stations in the group cannot call another. Fig. 1 Calling station Function (B) . . The group can call and/or be called by any other group (s) by programming.
The other members of the conference need not be allowed conference access. No. 200 programming of the specified station must be made in the exchange. For further details, please refer to Installation Hand Book for EXES-6000 CP-62. —78—...
Selectable Calling Tone The duration of the calling tone can be set for either 0.2 second (single note tone) or 0.3 second (warble tone). It is also possible to have the station without any calling tone. Note. 1. The duration of the continuous calling tone is im- possible to change.
The in/out indication panel must be used with the Data Transmitting and Receiving Units (DT-E11 and DR-B61). For further details, please refer to Installation Hand Book for EXES-6000 CP-62 and Instructions for the Data Transmitting and Receiving Units. Personal number...
Page 82
The in/out indication panel must be used with the Data Transmitting and Receiving Units (DT-E11 and DR-B61). For further details, please refer 'to Installation Hand Book for EXES-6000 CP-62 and Instructions for the Data Transmitting and Receiving Units. Personal number...
Destination Annunciation Indication When a personal number is registered at the station of the destination a person has moved to, the corresponding lamp The lamp on the Destination panel is turned on on the destination indication panel comes on, indicating where he is.
Page 84
Destination Annunciation Indication When a personal number is registered at the station of the destination a person has moved to, the corresponding lamp The lamp on the Destination panel is turned on on the destination indication panel comes on, indicating where he is.
1. The maximum number of calling stations is 128. 2. The indication panel must be used with the Data Transmitting and Receiving Units. For further details, please refer to Installation Hand Book for CP-62 and Instructions for the Data Transmitting and Receiving Units.
Page 86
Indication panel at station No. 239 Calling party selection 1. When there are more than 2 incoming calls to a busy station, the calling parties' lamps on the indication panel come on. The called party may select the calling party he wishes to respond to by touch dialing plus (desired calling party's number).
2-digit number. 3. The indication panel must be used with the Data Transmitting and Receiving Units. For further details, please refer to the Installation Hand Book for CP-62 and Instructions for the Data Trans- mitting and Receiving Units. —86—...
4. Dialing (pager number that is called) cancells calling the pager if the wrong number has been pressed. 5. For further details, please refer to the Installation Hand Book for CP-62 and Instructions for the Data Transmitting and Receiving Units. —87—...
Page 89
4. Dialing (pager number that is called) cancells calling the pager if the wrong number has been pressed. 5. For further details, please refer to the Installation Hand Book for CP-62 and Instructions for the Data Transmitting and Receiving Units. —88—...
General Purpose Control Station may be restricted from access to this function. This function can control other equipments by employing the Data Transmitting and Receiving Units. Select the required type of output. Door remote (Mode 1) One-shot make output (500/50 contacts) control Dial Fig.
Simplified Paging If an external speaker is connected instead of a station, simplified paging can be made without the PA amplifier if the caller dials that station number and makes a paging call. Simplified paging Note. For further details, please refer to "Installation Handbook for Exchange EX-610/620."...
Need help?
Do you have a question about the CP-62 and is the answer not in the manual?
Questions and answers