Play from a PC
You can also listen to audio through Bluetooth
Make sure that you have installed Bluetooth driver in
your PC before pairing.
The steps below are only for windows 7 operating
system. If you use other OS/IOS , refer to other OS/
Switch ON/OFF to turn on the speaker.
Press and hold
activate Bluetooth function on the speaker
» The Bluetooth indicator flashes.
Activate the Bluetooth function in your PC.
Add a Bluetooth device in your PC and
select "PHILIPS SBT300" for pairing.
» The speaker gives out 2 beeps and the
Bluetooth indicator steadily on.
Set "PHILIPS SBT300" as default
communication device in your PC.
1). Right click the speaker icon (
the lower right corner of the Windows
home screen and select "Playback Devices"
from the option menu
2). Right click desired speaker and select
"Set as Default communnication Device".
Start music play on your PC .
for 3 seconds to
Play from an external device
You can also listen to an external audio device
through this speaker.
Your speaker can play under MP3-LINK audio only
when the Bluetooth paused or stopped.
Connect the MP3-LINK cable to:
• the MP3-LINK jack (3.5mm) on the
back of the speaker.
• the headphone jack on an external
Start to play on the device.
press VOL +/- to increase or decrease the
to play or pause.
» Available only in Bluetooth mode.