Switch to standby mode
The speaker switches to standby mode in the
following situations.
In Bluetooth mode: deactivate bluetooth
•
connection without audio in cable plugged
in.
In MP3 link mode: no audio signal
•
detected over 15 minutes.
•
The battery level is low.
7
EN
4 Play
Play from a Bluetooth device
You can listen to a Buetooth device through this
speaker.
Note
•
The effective operation range between the speaker
and your Bluetooth device is approximately 10 meters
(30 feet).
1
Switch ON/OFF to turn on the speaker.
2
Press and hold
activate Bluetooth function on the speaker.
» The Bluetooth indicator flashes.
3
Activate the Bluetooth function in your
Bluetooth device (see the device user
manual).
4
Select "PHILIPS SBT300" on your device
for pairing.
» The speaker gives out 2 beeps and the
Bluetooth indicator stays steadily on.
• For elder devices, you need to input
"0000" as pairing password.
5
Start music play on your Bluetooth device .
3 sec.
PHILIPS SBT300
for 3 seconds to
PIN
0000