Service Chart - Filter Queen Majestic Manual

Do It Yourself Service Chart
Review this table to find do-it-yourself solutions for minor performance problems. Any other
service needed should be performed by an Authorized Service Center.
WARNING – Always turn off and unplug vacuum cleaner before performing
maintenance to the vacuum cleaner. Failure to do so could result in electrical shock
or personal injury.
Problem: red Caution Light Lit, Loss of Suction or
Overheating of the Motor
Cause:
Clogged Flat Disc Filter
Obstructed Hose
Obstructed Wand
Obstruction at neck of Power Nozzle
Filter Cone coated with extremely fine dust
Problem: Machine will not operate
Cause:
Plug not connected to outlet, or a faulty one
Motor overheated and tripped automatic
shut-off
Damaged switch
Damaged motor
Damaged power cord plug
Correction:
Replace Flat Disc Filter.
See instructions (6) under " "Power Nozzle Does
Not Operate."
Run long wire or a straightened coat hanger
through wand.
See instruction (4) under "Power Nozzle Does
Not Operate."
Empty Dirt Container and replace Filter Cone.
Flat Disc Filter may also need to be replaced.
Correction:
Insert plug firmly into wall outlet or try
another outlet.
Turn power switch to "O" off and unplug power
cord from wall. Let unit cool. Check for blockage
in attachment. Filter cones or discs may also
need to be replaced.
Call your local FILTERQUEEN
for service.
Call your local FILTERQUEEN
for service.
Call your local FILTERQUEEN
for service.
13
Distributor
®
® Distributor
® Distributor