JVC KY F560U Instruction Manual page 39

"PROCESS (2/2)" Screen (continued)
Settings in bold are factory settings
Item
"BLACK"
"FLARE"
"MASTER"
"FLARE(R)"
"FLARE(B)"
"PAGE BACK"
Note
Selection of "MASTER", "FLARE(R)" and "FLARE(B)" items is disabled when the "FLARE" item is set to
"OFF". (Displayed as "- - - - - -")
For switching gain of the dark portions. Switch via the video signals to be shot.
"NORMAL" : Standard mode
"STRETCH" : Stretches only the darker portions of the signal, thus
emphasizing the light and shade of the darker portions.
"COMPRESS" : Compresses gain of the black portion to add contrast in the
case when image shot is bright and with little contrast.
For correcting the black level when light that enters the lens reflects irregularly
and hence causing flare, where color appears on the black portion.
"OFF" : Correction disabled.
"ON" : Correction enabled.
Performs correction on the entire black level.
Increase value : Increases black level.
Decrease value : Reduces black level.
{Variable Values : –10 - 0 - +10}
For correcting Rch of black level in accordance with the luminance level when
light that enters the lens reflects irregularly, hence causing flare that turns the
entire screen whitish. Perform this together with FLARE(B).
Increase value : Increases the black level of Rch to enhance the reddishness.
Decrease value : Decreases the black level of Rch to reduce the reddishness.
{Variable Values : –10 - 0 - +10}
For correcting Bch of black level in accordance with the luminance level when
light that enters the lens reflects irregularly, hence causing flare that turns the
entire screen whitish. Perform this together with FLARE(R).
Increase value : Increases the black level of Bch to enhance the bluishness.
Decrease value : Decreases the black level of Bch to reduce the bluishness.
{Variable Values : –10 - 0 - +10}
Press the [SET] button to return to the "PROCESS(1/2)" screen when cursor is at
this position.
Function/Variable Values
39