Brother 888-F50 Operation Manual page 138

Troubleshooting
Error Messages
3
4
5
6
7
8
9
10
11
A-18
This message is displayed when the "Start/Stop" button was pressed while the foot
controller was connected.
This message is displayed when the buttonhole lever is down, a stitch other than a
buttonhole is selected, and a button, such as the "Start/Stop" button, is pressed.
This message is displayed when the buttonhole lever is up, a buttonhole stitch is
selected, and a button, such as the "Start/Stop" button, is pressed.
This message is displayed when a button, such as the "Start/Stop" button, was
pressed while the presser foot was raised.
This message is displayed when you tried to combine more than 70 decorative
stitches.
This message is displayed when the stitch mode was changed.
This message is displayed when you tried to delete a saved pattern.
This message is displayed when a button, such as the Reverse/reinforcement stitch
button, was pressed while the bobbin winder shaft is moved to the right.
This message is displayed when a button, such as the "Start/Stop" button, was
pressed after a stitch has been deleted.
Cause/Solution