Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
Symptom
The power does not
turn on.
The camera suddenly
powers down.
The image is not
captured when the
shutter button is
pressed.
The flash does not fire.
Cannot transfer files
over a USB connection.
Helpline No. UK/Ireland 00800 / 7877 2368
56
Web Support www.Traveler-service.de
Possible causes
* The batteries have run out.
* The batteries are not
oriented correctly.
battery/SD card
* The
cover
is not closed properly.
* The function of Auto off
in setup menu has been
activated.
* The batteries have run out.
* The camera is in
(Playback) mode.
* Memory is full.
* NO FLASH is selected
in flash mode.
* The camera is in
(Video) mode.
* The USB cable is not
connected securely.
* The USB driver is not
installed.
* The camera is turned
off.
Solutions / Corrective Actions
*
Load new or fully charged batteries.
* Load the batteries in the correct
direction.
battery/SD card
* Close the
cover
correctly.
* Set the option of Auto Shut
Down to Off.
* Turn the power back on or
charge the batteries.
* Toggle the
/ MODE button to
the camera mode.
* Transfer the desired files to your
computer and then delete
unnecessary files, or use a
different memory card.
* Select a different flash mode.
* Press the
/ MODE and switch
to the camera mode.
* Check all connections.
* Install the USB driver on your
computer.
* Turn on the camera.
Advertisement
Table of Contents
