Connecting To A Tv, Vcr Or Dvd Recorder; Playback On A Tv; Dubbing To A Vcr (Or Dvd Recorder) - JVC GZ-MG70E Instructions Manual

M5E6PAL.book Page 26 Friday, August 26, 2005 8:16 PM
26 VIDEO RECORDING & PLAYBACK
EN
Connecting to a TV, VCR or
DVD Recorder
Open the
cover.
To AV connector
AV Cable
(provided)
VCR/DVD Recorder
A
White to AUDIO L IN*
B
Red to AUDIO R IN*
C
Yellow to VIDEO IN (Connect when your TV/VCR/
DVD recorder has only A/V input connectors.)
D
Black to S-VIDEO IN (Connect when your TV/
VCR/DVD recorder has S-VIDEO IN and A/V
input connectors. In this case, it is not
necessary to connect the yellow video cable.)
* Not required for watching still images only.
NOTES:
The S-Video cable is optional. Be sure to use
the YTU94146A S-Video cable. Consult the
JVC Service Centre described on the sheet
included in the package for details on its
availability. Make sure to connect the end with
a core filter to the camera. The core filter
reduces interference.
It is recommended to use the AC adapter as
the power supply instead of the battery pack.
( pg. 16)
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camera is turned on.
To connect the camera to a PC, refer to the
software installation and USB connection guide.

Playback on a TV

1
Make sure all units are turned off.
2
Connect the camera to a TV, VCR or DVD
recorder as shown in the illustration.
To S connector
If using a VCR or DVD recorder, go to step 3.
If not, go to step 4.
3
Connect the VCR/DVD recorder output to the
TV input, referring to your VCR/DVD recorder's
instruction manual.
4
Turn on the camera, the VCR/DVD recorder
and the TV.
5
Set the VCR/DVD recorder to its AUX input
mode, and set the TV to its VIDEO mode.
S Cable
6
(optional)
Start playback on the camera. (
To choose whether or not the following
displays appear on the connected TV
Date/Time
Set [DATE/TIME] to [AUTO], [ON] or [OFF].
( pg. 48, 49)
Counter
Set [SCENE COUNTER] to [ON] or [OFF].
( pg. 48, 49)
(Pressing INFO/
displays.)

Dubbing to a VCR (or DVD Recorder)

TV
The following explains how to dub to a VCR.
When dubbing to a DVD recorder, refer to its
instruction manual.
1
Perform steps 1 to 6 above.
2
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
3
To stop dubbing, stop recording on the VCR,
then stop playback on the camera.
MasterPage: Body_Left
pg. 24)
button also turns on/off the