Home Screen; Frequency Range And Transmitter Output Power - Shure ULX-D Quick Start Manual

Home Screen

1
Receiver
① Receiver Information
Use >
UTILITIES HOME INFO
② Gain Setting
-18 to +42 dB, or Mute
③ Mic. Offset Indicator
Indicates offset gain is added to the transmitter
④ Transmitter Settings
The following information cycles when a transmitter is tuned to the
receiver's frequency:
• Transmitter Type
• Input Pad (Bodypack only)
• RF Power Level
• Transmitter Lock Status
⑤ Battery Runtime Indicator
Shure SB900 battery: runtime is displayed in minutes remaining
AA Batteries: runtime is displayed with a 5-bar indicator
⑥ TV Channel
Displays the TV channel that contains the tuned frequency
Transmitter Setting Icons
Display Icon Transmitter Setting
Bodypack input is attenuated 12 dB
-12 dB
Offset gain is added to the transmitter
1 mW RF power level
Lo
10 mW RF power level
Nm
20 mW RF power level
Hi
Menu is locked
M
Power is locked
P
No RF connection between a receiver and transmitter
-No TX-

Frequency Range and Transmitter Output Power

Band Frequency Range
( MHz)
G50 470 to 534
G51 470 to 534
G52 479 to 534
H51 534 to 598
H52 534 to 565
J50 572 to 636
K51 606 to 670
L50 632 to 696
L51 632 to 696
6
5
2 3 4
to change the home screen display
Power ( mW)
1/10/20
1/10/20
1/10
1/10/20
1/10
1/10/20
1/10
1/10/20
1/10/20
1
2
3
Transmitter
① Transmitter Information
Scroll ▲▼ at the home screen to change the display
② Power Lock Indicator
Indicates power switch is disabled
③ Battery Runtime Indicator
Shure SB900 battery: runtime is displayed in minutes remaining
AA Batteries: runtime is displayed with a 5-bar indicator
④ Menu Lock Indicator
Indicates menu navigation buttons are disabled
⑤ Mic. Offset
Displays microphone offset gain value
⑥ RF Power
Displays RF power setting
⑦ Bodypack Input Pad
The input signal is attenuated 12 dB
⑧ Encryption Icon
Indicates encryption is enabled on the receiver and has been transferred
to the transmitter from a sync
Encryption
ULXD features Advanced Encryption Standard (AES-256) encryption,
conforming to the US Government National Institute of Standards and
Technology (NIST) publication FIPS-197.
1. Enable encryption on the receiver:
The encryption symbol illuminates green and the LCD displays
.
SYNC NOW FOR ENCYPTION
2. Sync the transmitter to the receiver. The encryption symbol displays on
the transmitter.
Note: Any change to the encryption status on the receiver requires a sync
to transfer the setting to the transmitter. The Encryption Mismatch warning
will display on the receiver LCD panel if they are not on the same setting.
Band Frequency Range
( MHz)
P51 710 to 782
R51 800 to 810
JB (Tx 806 to 810
only)
AB (Rx 770 to 810
and Tx)
Q51 794 to 806
X50 925 to 932
8
7
6
4 5
> .
UTILITIES ENCRYPTION
Power ( mW)
1/10/20
1/10/20
1/10
"A" band (770.250-805.750): 1/10/20
"B" band (806.125-809.750): 1/10
1/10/20
1/10
3