Sony KP-43T70 Service Manual page 11

C
75-ohm coaxial cable
• VHF
and
EAC-66 U/V mixer
(not supplied)
• UHF
300-ohm twin lead cable
Cable or antenna
This is the simplest connection. Connection is
made directly from the cable or antenna to
the projection TV.
(Rear of projection TV)
VHF/UHF
Coaxial cable
Cable and antenna
You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.
Installing and Connecting the Projection TV (continued)
Connecting a cable TV system/
antenna to a VCR
1
Attach the coaxial cable from the
incoming cable connection or antenna to
VHF/UHF IN on the VCR.
2
Using a coaxial cable, connect VHF/UHF
OUT on the VCR to VHF/UHF on the
projection TV.
3
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right**).
Connecting a VCR and projection
TV to a cable box
1
Connect the single (input) jack of the
splitter to the incoming cable connection,
and connect the other two (output) jacks
(using the coaxial cable) to IN on the cable
box and VHF/UHF on the projection TV.
2
Using a coaxial cable, connect OUT on the
cable box to VHF/UHF IN on the VCR.
3
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right**).
6
Coaxial cable
(Rear of
projection TV)
VHF/UHF (No connection "TO
CONVERTER" in this case)
Antenna cable
Select Cable or ANT mode by pressing ANT
on the remote control.
Connecting a cable box
Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
Also, set "Cable" to "On" in the Channel Set
Up menu (page 27).
Coaxial cable
IN
*Cable box
S VIDEO
S VIDEO
(Rear of projection TV) Cable box and cable
AUX
Some pay cable TV systems use scrambled or
encoded signals requiring a cable box* only for
TO CONVERTER
certain channels (e.g. HBO, SHOWTIME, etc.)
VHF/UHF *Cable box
Scrambled
channels
For this set up, you can switch between
(Rear of projection TV)
scrambled channels (through your cable
VHF/UHF
box), and normal (CATV) channels by
pressing ANT on your remote control.
Notes:
• You may be able to program your Sony
OUT
• During PIP or Favorite Channel viewing,
Disconnect all power sources before making any connections.
(Rear of projection TV)
AUX
TO
CONVERTER
IN
VIDEO 1 VIDEO 3
VHF/UHF
OUT
S VIDEO MONITOR AUDIO
(VAR/FIX)
VIDEO
Y VIDEO
L
L
P
B (MONO)
(MONO)
AUDIO AUDIO
P
R R R
COMPONENT
VIDEO VMC-810S/820S
AUDIO-L
(not supplied)
AUDIO-R
YC-15V/30V
(not supplied)
(Rear of projection TV)
AUX
TO
CONVERTER
IN
VIDEO 1 VIDEO 3
VHF/UHF
OUT
S VIDEO MONITOR AUDIO
(VAR/FIX)
VIDEO Y VIDEO
L
L
P
B
(MONO)
(MONO)
AUDIO AUDIO
P
R R R
COMPONENT
VMC-810S/820S
VIDEO
AUDIO-L
(not supplied)
AUDIO-R
YC-15V/30V
– 11 –
(Rear of projection TV)
AUX
TO CONVERTER
75-ohm coaxial cable
(not supplied)
VHF/UHF
CATV cable
(unscrambled channels)
remote control to operate your cable box.
(see "Operating a Cable Box or Satellite
Receiver (SAT)" on page 45)
the AUX input can only be viewed in the
main picture.
Coaxial cable
2
VCR
S VIDEO
AUDIO R AUDIO L VIDEO
LINE
IN
VHF/UHF
OUT
LINE
OUT IN
1
3
Coaxial cable
1
Splitter (not supplied)
VCR
S VIDEO
AUDIO R AUDIO L VIDEO
LINE
IN
VHF/UHF 2
OUT
LINE
IN
OUT
OUT
IN
Cable box
3
(not supplied)
(Signal)
5
Cable/
Antenna
Cable/
Antenna