System Setup - Pace Sky plus User Manual

❖ System Setup

There should be no need for you to use the System Setup screens as
your Sky+ set top box should have been correctly set up when it was
installed.
However, the System Setup screens can be useful if, for example, you
buy a new TV and you want to make sure your Sky+ set top box
makes the best use of your new TV's features.
To use the System Setup screens, press services on your Sky+ remote
control. The Services screen appears on your TV. Highlight the System
Setup option, then press select. The System Setup screen appears on
your TV.
These System Setup options let you set the following:
Picture Settings – to see and change the Sky+ set top box picture
N
format, video output type, contrast level and timeout for the
Search & Scan banner. Select Save New Settings to confirm any
changes or press back up to cancel.
Sound Settings – to see and change the type of sound output
N
and standard volume level, the optical digital-audio output
setting (needed to receive a Dolby Digital 5.1 signal, see page 63)
and to turn background music on or off. You can also turn the
beep on or off. Select Save New Settings to confirm any changes
or press back up to cancel.
Language and Subtitles – to see and change the preferred audio
N
language and to turn subtitles on or off, where available. Some
programmes may offer a choice of language and/or subtitles.
Select Save New Settings to confirm any changes or press
back up to cancel.
Sky+ User's Guide 61