1. Manuals
  2. Brands
  3. Smithco Manuals
  4. Lawn Mower
  5. 13-550-C
  6. Service manual

Smithco 13-550-C Service Manual

Super rake 2/3 wheel drive
Hide thumbs
Table of Contents

Advertisement

Quick Links

PARTS & SERVICE
MANUAL
SUPER RAKE 2 WHEEL DRIVE
Model 13-551-C Bunker Rake
SUPER RAKE 3 WHEEL DRIVE
Model 13-550-C Bunker Rake
Starting Serial #1121 (2WD)
November, 1999
Starting Serial #6280 (3WD)
SMITHCO PRODUCT SUPPORT
1-800-891-9435
Hwy SS and Poplar Avenue, Cameron WI 54822
E-mail: productsupport@smithco.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 13-550-C and is the answer not in the manual?

Questions and answers

Related Manuals for Smithco 13-550-C

Summary of Contents for Smithco 13-550-C

  • Page 1 PARTS & SERVICE MANUAL SUPER RAKE 2 WHEEL DRIVE Model 13-551-C Bunker Rake SUPER RAKE 3 WHEEL DRIVE Model 13-550-C Bunker Rake Starting Serial #1121 (2WD) November, 1999 Starting Serial #6280 (3WD) SMITHCO PRODUCT SUPPORT 1-800-891-9435 Hwy SS and Poplar Avenue, Cameron WI 54822...

  • Page 2: Table Of Contents

    CONTENTS Introduction .......... 1-3 13-413 Hydraulic Sand Plow with Lift ..54-57 Introduction ............1 13-355 Hydraulic 3-Bank Valve ....58-59 Safe Practices ..........2 13-644 Sand Plow ........60-63 Specifications ............ 3 13-107 Infield Scarifier ......64-65 Optional Equipment .......... 3 13-116 Weed Cultivator ......

  • Page 3: Introduction

    INTRODUCTION Thank you for purchasing a product. Read this manual and all other manuals pertaining to the Super Rake carefully as they have safety, operating, assembly and maintenance instructions. Failure to do so could result in personal injury or equipment damage. Keep manuals in a safe place after operator and maintenance personnel have read them.

  • Page 4: Safe Practices

    19. Stop engine before making repairs/adjustments or checking/adding oil to the crankcase. 20. Use parts and materials supplied by SMITHCO only. Do not modify any function or part. These machines are intended for professional maintenance on golf courses and baseball fields. Other use is...

  • Page 5: Specifications

    13-111 Drag Mat Kit 13-199* Edger Kit 42-550 Green Star Total RBS System 13-438 Rake Assembly 42-503 RBS Mount for Smithco Super Rake 13-606 Rake Assembly with Lexan Blades 42-530 22-11.00 x 8 Turf Track R/S Tire 42-026 84" Stainless Steel Tournament Rake 42-531 22-11.00 x 8 Custom Smooth Tread Tire...

  • Page 6: Service

    MAINTENANCE Before servicing or making adjustments to machine, stop engine and remove key from ignition. Use all procedures and parts prescribed by the manufacturer's. Read the engine manual before operation. The suggested maintenance checklist is not offered as a replacement for the manufacturer’s but as a supple- ment.
  • Page 7 MAINTENANCE TIRE PRESSURE Caution must be used when inflating a low tire to recommended pressure. Over inflating can cause tires to ex- plode. Tires should be 5 psi (0.35bar). Improper inflation will reduce tire life considerably. ENGINE OIL Change and add oil according to chart below. Do not overfill. Use a high quality detergent oil classified "For Ser- vice SE, SF, SG"...
  • Page 8 MAINTENANCE BATTERY Batteries normally produce explosive gases which can cause personal injury. Do not allow flames, sparks or any ignited object to come near the battery. When charging or working near battery, always shield your eyes and always provide proper ventilation. Battery cable should be disconnected before using "Fast Charge".

  • Page 9: Service Chart

    SERVICE CHART Before servicing or making adjustments to the machine, stop engine, set park break, block wheels and remove key from ignition. Follow all procedures and ONLY use parts prescribed by the manufacturer. Read the engine manual before maintenance. ¤£ Engine Oil C R R R R R R R (Change every 50 hours) ¤...

  • Page 10: End User's Service Chart

    END USER’S SERVICE CHART ¤£Engine Oil (Change every 50 hours) ¤ Engine Oil Filter Engine for Leaks and Loose Parts ‡Air Cleaner (Paper Element)+A18+A18 ‡Pre-Cleaner (Every 25 hours) Spark Plugs Valve Clearance Idle Speed Air Cooling System Hoses *Tire Pressure Visual Inspection of Tires Fuel Level Fuel Filter...

  • Page 11: Adjustments

    ADJUSTMENTS RAKE LIFT CYLINDER Completely lower Rake Lift. Remove cotter pin (A) and clevis pin (B). Place attachment lift arms (C) at " above cross member (D) on Rake Lift. Loosen jam nut (E). Twist cylinder extension (F) so clevis pin end of cylinder exten- sion lines up with holes in attachment lift arm.

  • Page 12: Storage

    ADJUSTMENTS SPEED BOSS Speed Boss allows the machine to operate at a proper speed while raking bunkers on golf courses. This speed has been factory set at an average speed of 3-4 MPH(5-6.5 kph). The Speed Boss will only limit the speed while the rake is in lowerered into the operating posi- tion.
  • Page 13 NOTES...

  • Page 14: Wiring Diagram

    WIRING DIAGRAM Color Code Chart Blue Brown Yellow Green Orange Black Purple White...
  • Page 15 WIRING DIAGRAM REF# PART# DESCRIPTION QUANTITY 12-017 Hour Meter 50-360 Fuse Holder 22-071 Fuse 30 AMP 13-050 Purple Wire (fuse to ammeter) After Fire Solenoid (on engine) Rectifier (on engine) 22-003 Ammeter Stop Switch Terminal (on engine) 22-054 Battery Cable, Black Battery, automotive type 45-12V;...

  • Page 16: Hydraulic Diagram

    HYDRAULIC DIAGRAM HYDRAULIC PRESSURES HYDRAULIC PRESSURES HYDRAULIC PRESSURES HYDRAULIC PRESSURES HYDRAULIC PRESSURES Pump Displacement .913 in. / rev Pump Input Speed (up to) 3600 RPM Max. Operating Pressure 3500 PSI, 4500 Peek PSI Charge Pump Displacement .33 in. / rev Max.
  • Page 17 HYDRAULIC DIAGRAM REF# PART# DESCRIPTION QUANTITY 13-032 Wheel Motor 13-424 Hydraulic Hose long) 8840-62 Flex Guard Loom 13-425 Hydraulic Hose long) 8840-69 Flex Guard Loom 13-409 On - Off Valve 18-174 Elbow ST Thread 18-228 Hollow Hex Plug 18-266 Elbow 45° 13-587 Hydraulic Hose (16 long)

  • Page 18: Wiring Schematic

    WIRING SCHEMATIC 2 WHEEL DRIVE...

  • Page 19: Hydraulic Schematic

    HYDRAULIC SCHEMATIC 2 WHEEL DRIVE HYDRAULCI SCHEMATIC 3 WHEEL DRIVE...
  • Page 20 MAIN FRAME DRAWING...

  • Page 21: Parts

    MAIN FRAME PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-419 Left Floor Board 13-422 Left Rubber Mat HSD-14-100 Drill Screw 14 x 1 13-418 Front Bumper HB-38-16-250 Bolt - 16 x 2 HW-38 Washer HNTL-38-16 Lock Nut - 16 13-208 Bumper Brace HB-38-16-350 Bolt - 16 x 3...
  • Page 22 MAIN FRAME DRAWING...
  • Page 23 MAIN FRAME PARTS LIST REF# PART# DESCRIPTION QUANTITY HB-38-16-125 Bolt - 16 x 1 HW-38 Washer HNTL-38-16 Lock Nut - 16 13-637 Engine Mount 13-214 Battery Hold Down 8900-6 Flex Guard Loom HWL-14 Lockwasher HNW-14-20 Wing Nut - 20 13-213 Battery Box HB-516-18-100 Bolt...

  • Page 24: Accelerator Linkage

    ACCELERATOR LINKAGE DRAWING...
  • Page 25 ACCELERATOR LINKAGE PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-420 Right Floor Board 13-421 Right Rubber Mat HCP-516-100 Clevis Pin 11-100 Linkage Yoke - 24 13-526 Foot Pedal Assembly (Includes Ref# 2, 3, 5, 7 through11) 13-499 Grip HB-14-20-100 Bolt - 20 x 1 HWL-14 Lockwasher HN-14-20...
  • Page 26 RIGHT FENDER AND ENGINE DRAWING...

  • Page 27: Right Fender And Engine

    RIGHT FENDER AND ENGINE PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-488 Ignition Key with Switch 13-409 On-Off Valve 3WD to 2WD 13-539 Choke Control with Cable 13-566 Instrument Panel 13-640 Instrument Panel Decal HSA-8-075 Tapping Screw #8 x 22-003 Ammeter 12-017 Hour Meter 11-130...
  • Page 28 LEFT FENDER AND TANK DRAWING...

  • Page 29: Left Fender And Tank

    LEFT FENDER AND TANK PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-565 Valve Cover 13-554 Valve Cover Decal 13-261 Hydraulic Valve with Handle 13-262 Valve Handle Set 14-062 Seal Kit 14-203 Spring Centering Assembly Kit (One per Bank) 14-106 Relief Assembly Kit HB-14-20-200 Bolt - 20 x 2...
  • Page 30 CONSOLE DRAWING...

  • Page 31: Console

    CONSOLE PARTS LIST REF# PART# DESCRIPTION QUANTITY HRP-14-200 Roll Pin 20-057 Steering Wheel HSSHS-516-18-050 Set Screw - 18 x 20-129 Center Cap 13-034 Top Steering Shaft 40-009 Flange Bearing HB-516-18-175 Bolt - 18 x 1 HNTL-516-18 Lock Nut x 18 13-035 Console HWK-316-075...
  • Page 32 TWO WHEEL DRIVE FRONT FORK DRAWING...

  • Page 33: Two Wheel Drive Front Fork

    TWO WHEEL DRIVE FRONT FORK PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-005 Bottom Steeing Shaft 11-038 Bearing 11-039 Oil Seal HWK-316-063 Woodruff Key HRP-532-150 Roll Pin HSSHS-38-16-038 Set Screw - 16 x 60-300 U-Joint 60-325 Spacer 60-298 Sprocket (3510 x HMB-58-14 Machine Bushing x 14GA...
  • Page 34 THREE WHEEL DRIVE FRONT FORK DRAWING...

  • Page 35: Three Wheel Drive Front Fork

    THREE WHEEL DRIVE FRONT FORK PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-005 Bottom Steeing Shaft 11-038 Bearing 11-039 Oil Seal HWK-316-063 Woodruff Key HRP-532-150 Roll Pin HSSHS-38-16-038 Set Screw - 16 x 60-300 U-Joint 60-325 Spacer 60-298 Sprocket (3510 x HMB-58-14 Machine Bushing x 14GA...
  • Page 36 ENGINE AND PUMP DRAWING...

  • Page 37: Engine And Pump

    ENGINE AND PUMP PARTS LIST REF# PART# DESCRIPTION QUANTITY 15-165 Engine Briggs and Straton 16HP 13-532 Exhaust Port to Muffler Gasket 27-123 Muffler 23-076 O-Ring Adapter 23-143 Connector 18-267 Staright Thread Connector 23-130 Elbow 23-139 Barb Fitting 18-188 Elbow 45° 23-126 O-ring Plug 13-625...

  • Page 38: Rear Axle

    REAR AXLE DRAWING...
  • Page 39 REAR AXLE PARTS LIST REF# PART# DESCRIPTION QUANTITY 60-268 Lug Bolt - 20 x 1 14-265 Nut 1 - 20 34-100 Hub and Disc HNTL-12-13 Lock Nut - 13 34-101 Complete Brake 18-265 45° Elbow 13-612 Hydraulic Tube Assembly 34-058 Swivel Tee 34-122 Elbow...
  • Page 40 HYDRAULIC OIL FILTER DRAWING HYDRAULIC OIL TANK DRAWING...

  • Page 41: Hydraulic Oil Filter

    HYDRAULIC OIL FILTER PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-217 Oil Filter Bracket HB-14-20-075 Bolt - 20 x HWL-14 Lock washer HW-14 Washer 23-006 Hydraulic Oil Filter 23-031 Hydraulic Oil Filter Element 18-008 Reducer Bushing 23-139 Barb Fitting 23-142 Elbow HYDRAULIC OIL TANK PARTS LIST REF# PART#...
  • Page 42 REAR RAKE LIFT DRAWING...

  • Page 43: Rear Rake Lift

    REAR RAKE LIFT PARTS LIST REF# PART# DESCRIPTION QUANTITY HCP-12-150 Clevis Pin 18-208 Elbow 13-357 Cylinder 14-253 Seal Kit HNJ-34-16 Jam Nut - 16 13-366 Cylinder Extension 13-194 Rake Holder HB-38-16-100 Bolt - 16 x 1 HW-38 Washer HNTL-38-16 Lock Nut - 16 13-175 Rake Lift Assembly...

  • Page 44: On-Off Valve

    ON-OFF VALVE DRAWING...
  • Page 45 ON-OFF VALVE PARTS LIST REF# PART# DESCRIPTION QUANTITY 18-228 Hollow Hex Plug 14-243 Spool 14-242 Snap Ring 14-244 Quad Seal 18-175 Elbow - 45° 18-161 Elbow Standard Thread Valve Body 14-245 Lockwasher 14-246 Knob 13-427 Valve Bracket HB-38-16-125 Bolt - 16 x 1 HW-38 Washer HB-38-16-250...
  • Page 46 HYDRAULIC VALVE DRAWING...

  • Page 47: Hydraulic Valve

    HYDRAULIC VALVE PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-672 Left Handle w/ Linkage 14-062 Seal Kit 14-106 Relief Assembly Kit 13-261-03 N.R. Plug 13-261-01 Housing 13-261-07 Plunger 13-261-06 Spring 13-261-05 Plug 18-166 Adapter 13-261-04 Plug Cap (For Shipping Only) 18-168 Elbow 14-203 Spring Centered Kit...

  • Page 48: Variable Pump

    13-110 VARIABLE PUMP DRAWING...
  • Page 49 13-110 VARIABLE PUMP PARTS LIST REF# PART# DESCRIPTION QUANTITY 14-222 O-Ring 14-130 Ring 13-110-01 By-Pass Valve 14-115 Valve Plate 5† Cylinder Block 14-084 Pump Shaft 14-131 Woodruff Key 13-110-05 Pipe Plug 14-069 Needle Bearing 14-014 Lip Seal 14-113 Washer 14-220 Truncated Shaft (long 2 holes) 14-105 Retaining Ring...

  • Page 50: Front Wheel Motor (4.9 C.i.)

    13-032 FRONT WHEEL MOTOR (4.9 C.I.) DRAWING...
  • Page 51 13-032 FRONT WHEEL MOTOR (4.9 C.I.) PARTS LIST REF# PART# DESCRIPTION QUANTITY Water & Dirt Seal Service Housing Assembly Inner Seal 13-032-27 Thrust Bearing 13-032-28 Inner Bearing 13-032-29 Thrust Bearing 13-032-30 Drive Link Ring Seal 13-032-31 Manifold 13-032-32 Commulator Assembly (matched set) 13-032-33 End Cover...
  • Page 52 13-615 REAR WHEEL MOTOR (7.5 C.I.) DRAWING...

  • Page 53: Parts

    13-615 REAR WHEEL MOTOR (7.5 C.I.) PARTS LIST REF# PART# DESCRIPTION QUANTITY Water & Dirt Seal 13-615-05 Service Housing Assembly Inner Seal 13-032-27 Thrust Bearing 13-032-28 Inner Bearing 13-032-29 Thrust Bearing 13-615-03 Drive Link Ring Seal 13-032-31 Manifold 13-032-32 Commulator Assembly (matched set) 13-032-33 End Cover...
  • Page 54 13-505 LIFT ASSEMBLY DRAWING...

  • Page 55: Lift Assembly

    13-505 LIFT ASSEMBLY PARTS LIST REF# PART# DESCRIPTION QUANTITY HCP-12-150 Clevis Pin HB-716-14-150 Bolt -14 x 1 13-004 Cooler Bracket Main Frame ( Part of Trap Rake HSSQ-38-16-200 Square Head Set Screw - 16 x 2 HN-38-16 - 16 HB-38-16-125 Bolt -16 x 1 HW-38...

  • Page 56: Hydraulic Sand Plow With Lift

    13-413 HYDRAULIC SAND PLOW WITH LIFT DRAWING (DEALER INSTALLED) 13-412 HYDRAULIC SAND PLOW WITH LIFT DRAWING (FACTORY INSTALLED) HYDRAULIC VALVE PLUMBING...
  • Page 57 13-413 HYDRAULIC SAND PLOW WITH LIFT PARTS LIST (DEALER INSTALLED) 13-412 HYDRAULIC PLOW WITH LIFT PARTS LIST (FACTORY INSTALLED) REF# PART# DESCRIPTION QUANTITY 13-325 Brace HB-38-16-100 Bolt - 16 x 1 HW-38 Washer HNCL-38-16 Center Lock Nut 13-407 Cylinder Bracket 15-013 Rubber Bumper 13-168...
  • Page 58 13-413 HYDRAULIC SAND PLOW WITH LIFT DRAWING (DEALER INSTALLED) 13-412 HYDRAULIC SAND PLOW WITH LIFT DRAWING (FACTORY INSTALLED)
  • Page 59 INSTALLATION INSTRUCTIONS 1. Loosely bolt (Ref# 2)Brace, to (Ref# 3)Cylinder Bracket with the brace on top. The bolt and washer are on top; the washer and nut are on the bottom. 2. Remove two bolts that go through the bumper and bumper brace. Use these to bolt the cylinder bracket to the bumper.

  • Page 60: Hydraulic 3-Bank Valve

    13-355 HYDRAULIC 3-BANK VALVE DRAWING...
  • Page 61 13-355 HYDRAULIC 3-BANK VALVE PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-672 Left Handle w/ Linkage 14-205 Seal Kit 14-106 Relief Assembly Kit 13-261-03 H.R. Plug 13-355-01 Housing 13-261-07 Plunger 13-261-06 Spring 13-261-05 Plug 18-166 Adapter 23-011 Adapter 13-261-04 Plug Cap 8(shipping only) 18-168 Elbow...

  • Page 62: Sand Plow

    13-644 SAND PLOW DRAWING...
  • Page 63 13-644 SAND PLOW PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-208 Bumper Brace 13-642 Lift Handle HB-12-13-200 Bolt - 13 x 2 HNCL-12-13 Center Lock Nut - 13 HMB-12-14 Machine Bushing x 14GA 80-006 Rod End HNJ-12-20 Jam Nut - 20 HB-38-16-350 Bolt - 16 x 3...
  • Page 64 13-644 SAND PLOW DRAWING...
  • Page 65 INSTALLATION INSTRUCTIONS 1. Disconnect the negative (-) ground battery cable from the battery. 2. Remove the four tapping screws holding the console cover to the console and remove the cover. 3. Remove the nuts from (Ref# 8)Bolts. To hold the bolts you will have to go through the opening in the console.

  • Page 66: Infield Scarifier

    13-107 INFIELD SCARIFIER DRAWING...
  • Page 67 13-107 INFIELD SCARIFIER PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-117 Grader Blade HCP-12-150 Clevis Pin HHP-18 Bridge Pin 13-115 Hitch (Pistols) HMB-34-10 Machine Bushing x 10GA HMB-12-14 Machine Bushing x 14GA HP-18-100 Cotter Pin HB-38-16-100 Bolt - 16 x 1 13-114 Digger Blade 13-113...

  • Page 68: Weed Cultivator

    13-116 WEED CULTIVATOR DRAWING...
  • Page 69 13-116 WEED CULTIVATOR PARTS LIST REF# PART# DESCRIPTION QUANTITY HB-716-14-150 Bolt - 14 x 1 (Part of Trap Rake) Main Frame (Part of Trap Rake) HNTL-716-14 Lock Nut - 14 (Part of Trap Rake) Attachment Lift (part of Lift Assembly) HSSQ-38-16-200 Square Head Set Screw -16 x 2...

  • Page 70: Edger Kit

    13-199 EDGER KIT DRAWING...
  • Page 71 13-199 EDGER KIT PARTS LIST REF# PART# DESCRIPTION QUANTITY HCP-12-150 Clevis Pin, HHP-18 Bridge Pin, 13-200 Edger Frame HB-12-13-150 Bolt - 13 x 1 HW-12 Washer HWL-12 Lockwasher HN-12-13 - 13 13-203 Spindle Tube HG-14-28-180 Grease Fitting - 28 x 180° 21-169 Bearing &...

  • Page 72: Scarifier Vertical Blades

    13-577 SCARIFIER VERTICAL BLADES DRAWING...
  • Page 73 13-577 SCARIFIER VERTICAL BLADES PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-578 Frame Main Frame (Part of Trap Rake) HB-716-14-150 Bolt -14 x 1 HNTL-716-14 Lock Nut Attachment Lift (part of Lift Assembly) HMB-34-10 Machine Bushing x 10GA HRP-14-100 Roll Pin HN-38-16 - 16 HWL-38...

  • Page 74: Drag Mat Kit

    13-111 DRAG MAT KIT DRAWING...
  • Page 75 13-111 DRAG MAT KIT PARTS LIST REF# PART# DESCRIPTION QUANTITY HHP-18 Bridge Pin Hitch (Part of Trap Rake) Rake Lift (Part of Trap Rake) HB-38-16-225 Bolt - 16 x 2 HWL-38 Lockwasher HN-38-16 - 16 13-195 Left Mat Carrier Post 19-605 Drag Mat Chain 19-601...
  • Page 76 42-026 84"(213CM) STAINLESS STEEL TOURNAMANT RAKE DRAWING...
  • Page 77 42-026 84"(213CM) STAINLESS STEEL TOURNAMANT RAKE DRAWING REF# PART# DESCRIPTION QUANTITY HSTS-516-18-100 Stainless Truss Head Screw - 18 x 1 HWL-516 Lockwasher HN-516-18 - 18 42-104 Finishing Blades HSTS-516-18-075 Stainless Truss Head Screw - 18 x HW-516 Washer HWL-516 Lockwasher HN-516-18 - 18 42-111...
  • Page 78 42-026 84"(213CM) STAINLESS STEEL TOURNAMENT RAKE DRAWING...
  • Page 79 INSTALLATION INSTRUCTIONS 1. Attach drawbar (Ref 9) to hitch (Ref 11) using clevis pin (Ref 10) and cotter pin (Ref 12). 2. Attach rubber bumper (Ref 29) using cap nut and lock washer (Ref 21). Attach the rubber inserts (Ref 23) to the inside mounts (Ref 24 and 26).
  • Page 80 42-128 72"(183CM) STAINLESS STEEL TOURNAMENT RAKE DRAWING...
  • Page 81 42-128 72"(183CM) STAINLESS STEEL TOURNAMENT RAKE PARTS LIST REF# PART# DESCRIPTION QUANTITY HSTS-516-18-100 Stainless Steel Truss Head Screw - 18 x 1 HWL-516 Lock Washer HN-516-18 - 18 42-137 Finishing Blades HSTS-516-18-075 Stainless Steel Truss Head Screw - 18 x HW-516 Washer HWL-516...
  • Page 82 42-128 72"(183CM) STAINLESS STEEL TOURNAMENT RAKE DRAWING...
  • Page 83 INSTALLATION INSTRUCTIONS 1. Attach drawbar (Ref 9) to hitch (Ref 11) using clevis pin (Ref 10) and cotter pin (Ref 12). 2. Attach rubber bumper (Ref 29) using cap nut and lock washer (Ref 21). Attach the rubber inserts (Ref 23) to the inside mounts (Ref 24 and 26).

  • Page 84: Rake Assembly

    13-438 RAKE ASSEMBLY WITH FINISHING BLADES DRAWING...
  • Page 85 13-438 RAKE ASSEMBLY WITH FINISHING BLADES PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-441 Right Rake HMB-58-14 Machine Bushing x 14GA HNCL-58-11 Lock Nut - 11 HMB-12-14 Machine Bushing x 14GA HP-18-100 Cotter Pin 13-440 Center Rake 13-443 Finishing Blade 13-439 Left Rake 19-106 Rake teeth...
  • Page 86 13-606 RAKE ASSEMBLY WITH LEXAN BLADES DRAWING...
  • Page 87 13-606 RAKE ASSEMBLY WITH LEXAN BLADES PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-441 Right Rake HMB-58-14 Machine Bushing x 14GA HNCL-58-11 Lock Nut - 11 HMB-12-14 Machine Bushing x 14GA HP-18-100 Cotter Pin 13-440 Center Rake 13-605 Lexan Blade (with weight & rivets) 13-439 Left Rake 19-106...
  • Page 88 13-298 FAN RAKE ATTACHMENT DRAWING...

  • Page 89: Fan Rake Attachment

    13-298 FAN RAKE ATTACHMENT PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-310 Rake 13-306 Frame HB-38-16-100 Bolt - 16 x 1 HN-38-16 - 16 HWL-38 Lockwasher HCP-12-450 Clevis Pin HHP-18 Bridge Pin 19-107 Drawbar HP-18-100 Cotter Pin HCP-12-150 Clevis Pin 13-307 Hitch HNCL-14-20 Center Lock Nut...

  • Page 90: Professional Infield Finisher

    26-007 PROFESSIONAL INFIELD FINISHER DRAWING...
  • Page 91 26-007 PROFESSIONAL INFIELD FINISHER PARTS LIST REF# PART# DESCRIPTION QUANTITY Rake Holder (Part of Trap Rake) Rake Lift (Part of Trap Rake) HP-18-100 Cotter Pin HCP-12-150 Clevis Pin HB-58-11-300 Bolt - 11 x 3 HNCL-58-11 Center Lock Nut - 11 13-365 Drawbar 26-045...

  • Page 92: Flex Action Field Finisher

    26-008 FLEX ACTION FIELD FINISHER DRAWING...
  • Page 93 26-008 FLEX ACTION FIELD FINISHER PARTS LIST REF# PART# DESCRIPTION QUANTITY Rake Lift HCP-12-150 Clevis Pin HP-18-100 Cotter Pin HMB-12-14 Machine Bushing - 14GA HHP-18 Bridge Pin 26-046 Frame 26-049 Mounting Bar 26-047 Leveler Bar 21-060 Chain Clevis 26-115 Mesh Finisher HMB-58-14 Machine Bushing x 14GA...
  • Page 94 26-008 FLEX ACTION FIELD FINISHER DRAWING...
  • Page 95 INSTALLATION INSTRUCTIONS 1. Install (Ref# 15)Flail Bar Strap to center of mounting bar (Ref# 7)Mounting Bar with chain on top of Flail Bar Strap and Mounting Bar bent away from you. Apply a light coat of lubricant to overall length of Mounting Bar.

  • Page 96: Box Grader

    34-191 BOX GRADER DRAWING...
  • Page 97 34-191 BOX GRADER PARTS LIST REF# PART# DESCRIPTION QUANTITY 34-221 Lift Assembly 34-220 Right Pivot Bracket 33-086 Bushing 34-217 Break Up Bar HST-38-16-100 Truss Head Machine Screw - 16 x 1 HW-38 Washer HNCL-38-16 Center Lock Nut - 16 34-218 Cutter Blade HB-12-13-250 Bolt...
  • Page 98 SUPER RAKE LIFT ASSEMBLY...
  • Page 99 BOX GRADER PARTS LIFT REF# PART# DESCRIPTION QUANTITY 13-357 Hydraulic Cylinder (comes with machine) HNJ-34-16 Jam Nut - 16 13-366 Cylinder Extension (comes with machine) 34-219 Right Pivot Assembly 18-218 Bushing 34-221 Lift Assembly 34-220 Right Pivot Bracket 18-218 Bushing HB-12-13-150 Bolt - 13 x 1...
  • Page 100 34-190 SPIKER DRAWING...

  • Page 101: Spiker

    34-190 SPIKER PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-391 Bearing (2 each half) HB-516-18-100 Bolt - 18 x 1 HWL-516 Lock Washer HN-516-18 - 18 13-661 Inside Spiker Blade HB-38-16-250 Bolt - 16 x 2 HW-38 Washer 13-371 Left Spiker Box HB-38-16-350 Bolt - 16 x 3...
  • Page 102 SUPER RAKE LIFT ASSEMBLY...
  • Page 103 SPIKER LIFT PARTS LIST REF# PART# DESCRIPTION QUANTITY 13-357 Hydraulic Cylinder HNJ-34-16 Jam Nut - 16 13-366 Cylinder Extension 13-382 Cylinder Lift Frame 13-658 Right Pivot Bracket 13-659 Left Pivot Bracket HB-12-13-150 Bolt - 13 x 1 HW-12 Washer HWL-12 Lockwasher HN-12-13 - 13...

  • Page 104: Reference

    Reference...

  • Page 105: Decal List

    Left Fender Right Side Gas Cap 25-308 Caution Engine Idle Engine 25-322 Made In U.S.A. Above Left Corner of 25-285 25-329 Smithco Black " Right and Left Nose Cone 25-333 Briggs And Stratton Visible From Operators Position 25-337 Speed Boss...

  • Page 106: Quick Reference Replacement Parts

    QUICK REFERENCE REPLACEMENT PARTS REPLACEMENT FILTERS 23-031 Hydraulic Oil Filter 15-165-01 Air Filter Element with Pre-Cleaner Briggs and Stratton# 5050 11-131 Air Filter Element Fender Mounted 50-403 Fuel Filter 13-531 Engine Oil Filter Briggs and Stratton# 492932 SEAL KITS 13-110 Variable Pump 14-098 Seal Kit...

  • Page 107: Limited Warranty

    Batteries. Wheels and tires. A copy of the warranty for the above items is furnished if necessary with each SMITHCO product. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

This manual is also suitable for:

13-551-c

Table of Contents