Configuration - D-Link DAP-2553 User Manual
D-link dual band poe access point
Hide thumbs
Also See for DAP-2553:
- User manual (104 pages) ,
- Quick installation manual (48 pages) ,
- Install manual (9 pages)
Table of Contents
Advertisement
Section 3 - Configuration
Configuration
To configure the DAP-2553, use a computer that is connected to the DAP-2553 with an Ethernet cable (see the Network
Layout diagram ).
First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel >
Internet Options > Connections > LAN Settings and uncheck the enable box.
Start your web browser program (Internet Explorer, Mozilla Firefox).
Type the IP address and http port of the DAP-2553 in the address field
(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DAP-2553 and your computer are in the same subnet.
Note: If you have changed the default IP address assigned to the DAP-2553, make
sure to enter the correct IP address.
Enter the user name (admin) and your
password. Leave the password field
blank by default, and click Login.
Note: If you have changed the password, make sure to enter the correct password.
D-Link DAP-553 User Manual
1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DAP-2553 and is the answer not in the manual?
Questions and answers