Locking The Device - Motorola ES400 Quick Start Manual

Locking the Device

Lock the device to protect your information and to
prevent unwanted key presses. You can set the
Lock to access the device with or without a
password. You can also un-lock the ES400 using
biometrics (fingerprint) when the Motorola Lock
Plus feature is used (Refer to the ES400 User
Guide for more information on setting up the lock
feature).
The ES400 goes into lock mode when you press
the Power button or after a pre-defined time-out.
When the ES400 is locked, you will still be notified
of new messages, missed calls and upcoming
appointments.
When you press the Power button to wake the
ES400, the Lock screen displays. To unlock the
ES400, enter your pin or swipe your finger across
12
the fingerprint reader (if Motorola Lock Plus
feature is enabled).