Normal Play - Denon DCM-370 Operating Instructions Manual

Stereo cd player
Hide thumbs Also See for DCM-370:
Table of Contents

Advertisement

CONNECTIONS
(1) Connecting
the Output Terminal
l
Connect one end of the connection cord supplied with the CD Player to
the output terminals, left CL) and right (Pi) of the CD Player, and the other
end to the CD, AUX or TAPE PLAY input terminals, left (L) and right (R). of
the amplifier.
DCM-3701270
I
(Amolifier)
; Power supply Outlet
I n
44
(2) Connecting
the Digital Output Jack (COAXIAL) (DCM-370 only)
l
Use a 75 Q/ohm pin cord to connect the digrtal output jack (COAXIAL) of
the DCM-370 to the digital input jack (COAXIAL) on a digital processor or
MD recorder, available in stores.
DCM-3701270
El
Dlgftal
processor or MD recorder
Power supply
outlet
NORMAL PLAY
(2)
Follow
the steps
below
to get an understanding
of the disc play
procedure.
(I)
Starting
Playback
I
k
,J(;:
PLAY)
1.
2.
3.
4.
5.
6.
Turn the power switch on and press the open/close
(A OPEN/CLOSE)
button to open the drawer.
Set the disc to be played in the front side tray.
Press the play button WI.
The drawer closes and the disc just loaded IS played.
The disc number,
track number
and elapsed
time, etc., for the disc
currently playrng appear on the drsplay wrndow.
If the open/close
(6 OPEN/CLOSE)
button
is pressed while a disc is
playing, playback continues, but the drawer opens and four discs can be
replaced. The disc that can be replaced swatches when the DISC SKIP
button is pressed.
Press the open/close (C OPEN/CLOSE) button again to close the drawer.
(3)
.
.
1.
2.
SYNCHRO Jack Connections
Connect
the SYNCHRO jack with a DENON cassette
deck which
is
equipped with a SYNCHRO jack, then make a synchronized recording. Use
the connection cord supplied with the cassette deck.
To make use of this function, also connect the output jacks and make the
settings
so that a recording
can be made from the CD player to the
cassette deck.
DCM-3701270
(Cassette Deck)
El
Power supply outlet
Stopping
Playback
\
-
J
(H STOP)'
I'
Press the stop button (m STOP) to stop playback.
To replace discs, press the open/close (6 OPEN/CLOSE) button.
The drsc which was playing switches over to the front side and the drawer
opens.
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcm-270

Table of Contents