Necessary Settings Before Use; Charging The Battery Pack; Checking The Remaining Battery Power - JVC GZ-HD30U Instructions Manual

Necessary Settings before Use

Charging the Battery Pack

1
Close the LCD monitor to turn off the
camera.
2
Attach the battery pack.
3
Connect the AC adapter.
AC Adapter
•
The power/charge lamp blinks to indicate
charging has started.
•
When the lamp goes out, charging is
fi nished.
Required charging/recording time (approx.)
* When the LED light is off and the monitor
backlight is set to [STANDARD] mode.
Battery pack Charging time
BN-VF815U
2 hr. 40 min.
(Provided)
BN-VF823U 3 hr. 50 min.
NOTE
The actual recording time may shorten
depending on the recording environment, such
as when recording scenes with fast moving.
18
EN
BATT.
DC Connector
To AC Outlet
(110V to 240V)
Recording
time
1 hr. 25 min.*
2 hr. 10 min.*
To detach the battery pack
Slide and hold BATT. (step 2), then remove
the battery pack.
NOTES
•
You can also use the camera with just the AC
adapter.
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.

Checking the Remaining Battery Power

Preparation:
•
Close the LCD monitor to turn off the
camera.
•
Attach the battery pack.
!
mode: press INDEX twice.
#
mode: press INDEX.
INDEX
Battery information is displayed for approx.
3 seconds if the button is pressed and
released quickly, and for approx. 15 seconds
if the button is pressed and held for several
seconds.
To return to the normal screen
Press INDEX.
NOTE
The recordable time display should only be
used as a guide. It is displayed in 10 minute
units.
BATTERY CONDITION
MAX TIME
min