Pairing To Your Hearing Instruments - ReSound Mini Microphone User Manual

Pairing to your hearing instruments

Note! The following information is intended primarily for your hear-
ing care professional, who in most cases will complete the tasks
that are necessary before the ReSound Unite™ Mini Microphone
can be used with your hearing instruments. However, the process
is designed to be simple and most people can do it themselves.
It is possible to pair up to three Unite™ streaming devices - e.g.
one Mini Microphone and two TV streamers (optional Unite™
accessory) - with a given pair of hearing instruments. Therefore,
channel 1, 2 or 3 must be selected when starting the pairing
process.
Pairing the Mini Microphone in channel 1
1. Make sure resound unite™ Mini Microphone is turned ON.
Your hearing instruments must be OFF – open the battery
door.
2. remove the silver cap from the Mini Microphone. With the
tip of a pen or similar object, press the small pairing
button one time on the front of your resound unite™ Mini
Microphone (see picture on the next page). The Led will
now blink yellow once every 2 seconds to indicate that
is ready to be paired in channel 1. Your resound unite™ Mini
Microphone will remain in pairing mode for 20 seconds.
12
3. While pairing mode is activated, close the battery doors
of both hearing instruments and make sure they are ON. A
successful pairing will be indicated by an audible melody
played in both hearing instruments.
You are now ready to use the resound unite™ Mini Micro-
phone!
Pairing the Mini Microphone in channel 2 or 3
To pair the Mini Microphone in channel 2, press the pairing button
twice. The Led will now blink yellow twice every 2 seconds to
indicate that it is ready to be paired in channel 2. Close the battery
doors on the hearing instruments.
13