Kyocera FS-1020D Installation Manual page 16

Adjusting the paper stopper for Folio and Oficio II
sizes
Perform the following procedure in order to adjust the paper stopper when loading
Folio and Oficio II size paper into the paper cassette.
14
1
Remove the stopper extension lock from
the paper stopper.
Stopper
Extension
Lock
2
Slide the paper stopper back until the
edge of the cut out portions (1) of the
paper stopper are aligned with the back
(1)
edge of the paper cassette.
3
Insert the stopper extension lock into
the holes in the paper stopper.
4
To secure the stopper extension lock in
place, press down on the lock and slide
the paper stopper back slightly. The
paper stopper will be fixed in place for
Folio and Oficio II size paper.