Removing The Top Cabi Assy And Mode Fpc Assy; Cabinet Base Assy - FujiFilm FinePix E500 Service Manual

FinePix E500 Service Manual
2-8.

Removing the TOP CABI ASSY and MODE FPC ASSY

(1) Remove the connector.
(2) Remove the screw (M1.7 x 3.5)
(3) Remove the FPC in the direction indicated by the
arrow.
* Detach FPC carefully because it is pasted with the
double-faced tape.
(4) Remove the TOP CABI ASSY in the direction indicated
by the arrow.
2-9.

CABINET BASE ASSY

(1) Remove the screw (M1.7 x 3.5)
(2) Remove the soldering(3point) of MAIN PWB ASSY.
(3) Remove the MAIN PWB ASSY in the direction
indicated by the arrow.
[Notes on assembly]
* Confirm whether the edge of MAINPWB ASSY has been
inserted in BATT HLD ASSY.
2. Disassembly
3
3
1
1
4
2
2
13