Table of Contents
Advertisement
TROUBLESHOOTING/WIRING DIAGRAM
TROUBLESHOOTING
PROBLEM.
Little or no solution flow
Loss of vacuum/
Solution recovery
WIRING DIAGRAM
4-2
CAUSE
Clogged spray jet on cleaning
tool
Faulty pump
Incorrectly attached solution
hose
Incorrectly attached vac hose
Obstruction in cleaning tool
Recovery tank is not securely
mounted on the solution tank.
PRS2/PRSD2 98901 02/08/03
SOLUTION
Remove and clean jets
Check and replace pump.
(Call Windsor Tech. Services first)
Ensure solution hose coupler is securely attached to the
coupler on the solution tank.
Ensure vac hose is pushed completely onto the recovery
tank inlet.
Inspect for and remove any debris.
Tighten latch on back end of the machine.
Advertisement
Table of Contents
