Key Positions; Switch Positions - Volkswagen Passat 2006 Service Training

Key positions

The various terminal voltages (terminal S,
terminal 15) are activated and the start
procedure is initiated by pushing the ignition key
into the entry and start authorisation switch.

Switch positions

The following switch positions can be set by
pushing the ignition key:
- P Off
0
- P S contact on
1
- P Terminal 15 on
2
- P Terminal 15 drive
3
(the ignition key automatically moves
to this position after starting)
- P Terminal 50 on
4
Legend
D1 Immobilizer reading unit
D2 Immobilizer reader coil
E415 Entry and start authorisation switch
J362 Immobilizer control unit
J519 Onboard supply control unit
J527 Steering column electronics control unit
J533 Data bus diagnostic interface
J764 Electronic steering column lock control unit
N376 Ignition lock withdrawal solenoid lock
P P P P P
0 1 2 3 4
Functional Diagram
S340_041
S340_045
S340_046
45