KEEWAY Focus Maintenance Manual page 50

Install the bearing ① with special tool
install the spacer ② and circlip③.
install the new oil seals④ and ⑤ to the
movable driven face with the special tool.
apply grease to the lip of oil seals and groove
of inside of movable driven face.
QIANJIANG special super grease
NOTE:
When reinstalling the movable face to the fixed
face, make sure that the oil seal is positoned
properly.
install the pin ⑥ at three places on the driven
face hub.
Apply grease lightly to the cam part where the
pins are placed.
Install two O-RINGs⑦.
50