Start−Up And Performance Checklist - Lennox Elite XC13 Installation Instructions Manual

S
Temperature Indicator
displays the actual room temperature.
PROGRAMMABLE THERMOSTATS
Your Lennox system
programmable thermostat. These thermostats provide the
added feature of programmable time-of-day set points for
both heating and cooling. Refer to the user's information
manual provided with your thermostat for operation
details.
Preservice Check
If your system fails to operate, check the following before
calling for service:
S
Make sure all electrical disconnect switches are ON.
Start−Up and Performance Checklist
Job Name
Job Location
Installer
Unit Model No.
Nameplate Voltage
Rated Load Ampacity
Maximum Fuse or Circuit Breaker
Electrical Connections Tight? -
Indoor Blower RPM
Discharge Pressure
Leak Checked? - Properly Insulated? -
Refrigerant Lines:
Fully Opened? - Caps Tight?
Service Valves:
Voltage With Compressor Operating
506120−01 03/10
The temperature indicator
−
may be controlled by
Serial No.
Compressor
Indoor Filter clean? -
S.P. Drop Over Indoor (Dry)
Suction Pressure
S
Make sure the room thermostat Temperature Selector
and System Switch (Heat, Cool, Auto) are properly
set.
S
a Check for and replace any blown fuses, or reset any
tripped circuit breakers.
S
Make sure unit access panels are in place.
S
Make sure air filter is clean.
S
Write down the unit model number and have it handy
before calling.
OPTIONAL ACCESSORIES
Refer to the Lennox XC13 Engineering Handbook for the
latest available accessories for this unit.
Job no.
City
City
Service Technician
Outdoor Fan
Supply Voltage (Unit Off)
Outdoor Coil Entering Air Temp.
Refrigerant Charge Checked?
Outdoor Fan Checked?
-
Calibrated? - Properly Set? - Level? -
Page 28
Date
State
State
-
-
Thermostat