Hitachi CP-SX1350 P5SX+ Service Manual page 30

6-12 HIDDEN SERVICE menu
HIDDEN SERVICE
MUTE COLOR BLACK
AIR-SENSOR
6-13 Set operating time display method (accumulated lamp time display method)
1. Select [OPTION] from the [MENU] display, then select [LAMP TIME].
2. Press the [ ], [Enter] or [RESET] button.
3. Press the [RESET] button once, then press [KEYSTONE] for 3 seconds or more to display the screen
shown below. (The menu will close after 10 seconds if there are no further operations.)
4. Use " " or " " to select the usage status number. (The usage status is as shown below.)
Usage status number
CP-SX1350(P5SX+)
To display the OSD for "HIDDEN SERVICE" menu set up.
When using control panel
1. Display the menu by the "MENU"
button.
2. Select the "OPTION" on the menu.
3. Continue press the button " " fi rst,
then press the button " " together
with "RESET", and hold for 3
seconds.
RUN TIME
On
Off
Usage status number (See below)
0 ..... Total usage status
1 ..... Current usage status
2 ..... Usage status before first reset
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
10 ..... Total time(hrs.) of AC power-on.
1. Display the menu by the "MENU"
button.
2. Select the "OPTION" on the menu.
3. Press the "MAGNIFY OFF" button.
Next hold the "MAGNIFY OFF"
button for 3 seconds.
OPTION
Time
1234h
Number of times on
00012
00011 Number of times off
No.0
30
When using remote control