Assembly
Your hand vacuum comes fully assembled.
Charging
***IMPORTANT*** ALWAYS TURN UNIT
OFF PRIOR TO CHARGING*
*failing to do so may result in battery not fully
charging
1. Insert charging adapter plug into the charging
port on the back of the unit.
2. Plug the adapter into the wall outlet. The
power LED lights will illuminate when charging.
Charge the unit completely for 8 hours prior to
first use.
NOTE: The adaptor may become warm during
charging – this is normal.
3. When the unit is fully discharged,
approximately 8 hours of charging time is
required for the battery to regain full capacity.
Charging
Battery Status
LED Color
Full
Green
Low
Red
Charging
Green
Slow Blinking Red
WARNING
Do not plug in your cordless hand vacuum
until you are familiar with all instructions
and operating procedures.
www.BISSELL.com
5