Table of Contents
Advertisement
RECORDING
Set REC MODE, S-VHS (S-VHS ET)**, TAPE
LENGTH and DATE/TIME in SYSTEM MENU.
(
pg. 18 – 22, "MENU SETTINGS")
1
Remove the lens cap. Set the Power Switch
to "
" or "
" while pressing down the Lock
!
Button
located on the switch.
Shooting while using the viewfinder: Make sure
the LCD monitor* is closed and locked.
Shooting while using the LCD monitor*: Make
sure the LCD monitor* is fully open.
The camcorder enters the Record-Standby mode
D
and "PAUSE"
is displayed.
• The viewfinder and LCD monitor cannot be used
simultaneously on this camcorder. Therefore,
when opening the LCD monitor and tilting it
upward to 180°, you cannot view any image in the
viewfinder, however you can shoot yourself while
viewing your own image in the LCD monitor.
2
Press the Recording Start/Stop Button
P
appears while recording is in progress.
• To stop recording, press the Recording Start/Stop
0
Button
. The camcorder re-enters the Record-
Standby mode.
To Adjust The Brightness Of The LCD Monitor*:
When the Power Switch
"LCD BRIGHT" in SYSTEM MENU (
When the Power Switch
"OFF", this adjustment cannot be performed.
* Applicable models only.
** GR-SXM49/SX25 only.
0
.
@
is set to "
", adjust
pg. 18, 22).
@
is set to "
" or
PLAYBACK
1
Load a tape (
Cassette").
2
Set the Power Switch
pressing down the Lock Button
@
switch. To start playback, press 4/6
To stop playback temporarily (Still Playback), press
&
. To stop playback, press 5
4/6
e
to rewind, or 3
High-speed picture search (Shuttle Search) is
possible by pressing 2
playback (holding 2
playback continues search until released). To
resume normal playback, press 4/6
For VIDEO RECORDING/VIDEO PLAYBACK
• The camcorder shuts off automatically after about
5 minutes in the Record-Standby or Stop mode.
To turn on again, set the Power Switch
"OFF", then to "
• When the Power Switch
"
" and the LCD monitor* is opened at an
angle of 60 degrees or more, the LCD monitor*
switches on and the viewfinder switches off
automatically to save power.
• The playback picture can be viewed in the
viewfinder (with the LCD monitor* shut), on the
LCD monitor* or on a connected TV (
"Connections To A TV/VCR").
• To remove the indications,
OSD OUTPUT in SYSTEM MENU.
• To control the speaker* volume, rotate the MENU
1
Wheel
towards "+" to turn up, or towards "–" to
turn down. While shooting, sound is not heard
from the speaker*.
• If TBC (
pg. 14) is engaged during Still
Playback, noise bars will not appear
.
SX25 only)
* Applicable models only.
1 1
pg. 8, "Loading/Unloading A
@
to "
" while
!
located on the
&
.
r
. Press 2
*
to fast-forward the tape.
e
*
or 3
during
e
*
or 3
down during
&
.
", "
" or "
".
@
is set to "
pg. 21, DISPLAY or
(GR-SXM49/
@
to
", "
" or
pg. 15,
Hide quick links:
Advertisement
Table of Contents
