Slot Clock (Lithium) Battery Insertion/Removal - JVC GR-FX11 Instructions Manual

8
EN
Battery holder
Slot
GETTING STARTED
Clock (Lithium) Battery Insertion/Removal
This battery is necessary for clock operation and to
perform date/time settings.
1
Switch off the unit's power and remove the power
supply unit (battery pack, AC Power Adapter/Battery
Charger, etc.).
2
Pull out the battery holder to remove it from the
camcorder.
3
Insert the battery in the holder, and be sure to have
the "+" mark visible.
4
Slide the holder back into the slot until you hear a
click.
NOTES:
See "SAFETY PRECAUTIONS" (
on safe handling of lithium batteries.
To avoid losing the battery and/or battery holder, place
the camcorder with the grip side up as shown in the
illustration when inserting/removing the battery.
(cont.)
pg. 2) for information