Grip Adjustment; Viewfinder Adjustment; Tripod Mounting; Shoulder Strap Attachment - JVC GR-FX11 Instructions Manual

Power Zoom Lever
Recording
Start/Stop Button
3 3
2 2
180 180
Set to "CAMERA"
("AUTO" or "PRO.").
PAUSE
1
4
2
3

Grip Adjustment

1
2
3

Viewfinder Adjustment

1
2
1
3

Shoulder Strap Attachment

1
2

Tripod Mounting

1
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to Stabilize the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
Separate the Velcro strip.
Pass your right hand through the loop and grasp the
grip.
Adjust so that your thumb and fingers can easily
operate the Recording Start/Stop Button and Power
Zoom Lever. Refasten the Velcro strip.
Set the Power Switch to "CAMERA" ("AUTO" or
"PRO.").
Adjust the viewfinder manually for best viewability.
Turn the Diopter Adjustment Control until the
indications in the viewfinder are clearly focused.
Following the illustration, thread the strap through the
1
eyelet , then fold it back and thread it through the
2
buckle . Repeat the procedure to attach the other
end of the strap to the other eyelet
the strap is not twisted.
Adjust as shown in the illustration
Align the screw and camera direction stud on the
tripod with the camera's mounting socket and stud
hole. Then tighten the screw.
15
EN
3
, making sure
4
.