JVC GR-FX11 Instructions Manual page 29

Select Wheel
MENU Button
Display
REC T I ME
O F F
/ 4 S
1
1 / 2 S
1 S
5 S
E X I T
I NT . T I ME
O F F
1 5 S
3 0 S
1 M I N
5 M I N
E X I T
1 5 S
1 S
INT. TIME and REC TIME indications on the normal
screen
Recording
Start/Stop Button
REC TIME Menu
INT. TIME Menu
Interval time
indicator
Recording time
indicator
Time-Lapse
You can record sequentially at preset time spans. Leaving
the camcorder aimed at a specific subject, you can record
subtle changes over an extended period of time.
NOTES:
Before performing the following steps, make sure that:
The Power Switch is set to "PRO.".
The camcorder is in the Record-Standby mode.
1
Press MENU. The Menu Screen appears.
2
Rotate the Select Wheel to move the highlight bar to
"NEXT" in Menu Screen 1 and press it. Menu Screen
2 appears with the highlight bar on "REC TIME" and
press it. The REC TIME Menu appears. Rotate the
Select Wheel to move the highlight bar to the desired
recording time, then press it. The Menu Screen
reappears.
3
Rotate the Select Wheel to move the highlight bar to
"INT. TIME", then press it. The INT. TIME Menu
appears. Rotate the Select Wheel to move the
highlight bar to the desired interval time, then press it.
The Menu Screen reappears with the highlight bar on
"RETURN". Press the Select Wheel again to close the
Menu Screen.
4
Press the Recording Start/Stop Button. Recording and
intervals alternate automatically.
5
To release the Time-Lapse mode, when "
displayed, press the Recording Start/Stop Button to
display "
"INT. TIME" in the Menu Screen to "OFF".
NOTES (for Animation and Time-Lapse):
For best results, make sure the camcorder is secured
when shooting in Animation or Time-Lapse mode.
Fade- or wipe-in/out cannot be performed during
Animation or Time-Lapse shooting.
Before performing other operations following Animation
or Time-Lapse recording, make sure the Animation or
Time-Lapse mode is deactivated.
Animation and Time-Lapse are cancelled when the
power is shut off or when the cassette is ejected.
EN
" is not
", then set "REC TIME" and
29