Quato iColor Display 3.7 User Manual page 52

iColor Display Software
iColor Display´s different calibration setups.
Activate your license by clicking "Load License" and select the
"Quato iColor Display.lic" file from the CD.
52
Overview
Quato's iColor Display offers a clean and well orga-
nized interface that is split into the calibration part
on the left and the tools part on the right. To naviga-
te within the software, just click the buttons on the
left/right side. iColor Display provides a selection of
calibration setups.
- Hardware calibration for Intelli Proof/Intelli Proof LE
- Factory calibration for Intelli Color
- Software calibration CRT
- Software calibration TFT
- Profiling only (for notebooks)
Each option offers a different feature set that is
optimized for the specific task. Aside from Quato
monitors, all other monitors can be calibrated with
iColor Display by using the manual software calibra-
tion option. In manual mode, the software supports
the adjustment of gamma if the monitor can control
its gamma, and whitepoint (RGB) and luminance.
This offers a high precision and match to the target.
Nevertheless, only the hardware calibration offers
optimum results with Quato Intelli Proof Displays.
Notice: iColor Display needs administrator rights to
save and load the profiles. It is also possible to
enable admin rights on the profiles folder only.
Licensing
Upon the startup of iColor Display, the software sear-
ches for a connected Quato Display, and enables the
features in accordance to the detected display.
If no Quato display is used, you have to manually
load the license file. The license file is called „Quato
iColor Display.lic" and can be found on the CD (ex-
cept LE). On a Mac, open the „About iColor Display"
and press the „Register" button. Now load the licen-
se file. On a PC, open the „Help Menu" and select
„Register". Then load the license file.
Calibration interval
As all Quato displays support at least a basic stabi-
lisation feature, a re-calibration is only needed on a
monthly basis. If the environmental situation chan-
ges a lot or a third party display without stabilisation
is used, a shorter interval might be necessary.