Quato iColor Display 3.7 User Manual page 33

for PC signals. For Video signals either the Gamma or
the Normal mode should be used. The display uses
only one LUT for all input sources.
Management is used to select languages, to change
the OSD position, the scaling, and to reset the whole
unit
The Stabilisation feature is used to toggle between a
stabilized mode or unstabilized mode (whitepoint/
luminance).
The PIP feature allows you to display a second video
source in a moveable and sizeable window. Only one
data and video connection can be active during PIP.
It is not possible to mix two data or two video con-
nections.
33